IPsecIKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3 support
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs code
DMVPNMethod of building scalable IPsec VPNs
SSTPSSTP client instance support
ZeroTierZeroTier VPN client support
WireGuardWireGuard VPN client and server support
ID rangeRespond to one ID in range [1;255] or any
Remote access permissionAllow access through WAN
Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
CumulonimbusAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
Azure IoT HubCan send device IP, Number of bytes send/received, Temperature, PIN count to AzureIoTHub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
CPUMediatek MIPS 24Kc 580 MHz
RAM128 MB, DDR2
FLASH storage16MB, SPI Flash
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup, restore point
PHOTOUpdate FW
RMSUpdate FW/configuration for multiple devices at once
Remembering settingsUpdate FW without losing current configuration
Operating systemRutOS (OpenWrt based Linux OS)
LanguagesBusybox shell, Lua, C, C++
Developer toolsSDK package with build environment provided
GNSSGPS, GLONASS, BeiDou, Galileo and QZSS
CoordinatesGNSS coordinates via WebUI, SMS, TAVL, RMS
NMEANMEA 0183
NTRIPNTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server softwareSupported server software TAVL, RMS
GeofencesConfigurable multiple geofence zones
RS232DB9 connector, full RS232 (with RTS, CTS)
RS485RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud in the circle
Serial functionsConsole, Serial over IP, Modem, MODBUS gateway, NTRIP Client
Input1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
Output1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)
EventsEmail, RMS, SMS
I/O jugglerAllows to set certain I/O conditions to initiate event
Connectors4-pin industrial DC power socket
Input voltage range9 30 VDC, reverse polarity protection; surge protection > 31 VDC 10us max
PoE (passive)Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDC
Energy consumption< 2 W idle, < 7 W Max
Network4 x RJ45 ports, 10/100 Mbps
I/Os2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector (available from HW revision 1600)
LED indicators1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED