Hikvision bullet iDS-2CD7AC5G0-IZHS F8-32

2.8 to 12 mm, horizontal FOV: 96.2° to 36.4°, vertical FOV: 69.3° to 27.2°, diagonal FOV: 129.4° to 45.5°

8 to 32 mm, horizontal FOV: 40.2° to 14.4°, vertical FOV: 29.6° to 10.8°, diagonal FOV: 51.47° to 17.8°

2.8 to 12 mm: F1.2 to F2.5

8 to 32 mm: F1.7 to F1.73

2.8 to 12 mm: 50 m

8 to 32 mm: 100 m

50 Hz: 25 fps (4096 x 2160, 3840 x 2160, 3072 x 1728, 2560 x 1440, 1920 x 1080, 1280 x 720)

60 Hz: 30 fps (4096 × 2160, 3840 × 2160, 3072 × 1728, 2560 × 1440, 1920 × 1080, 1280 × 720)

50Hz: 20fps (4000×3000)

60Hz: 20fps (4000×3000)

50 Hz: 25 fps (704 × 576, 640 × 480)

60Hz: 30fps (704x480, 640x480)

50Hz: 25fps (1920×1080, 1280×720, 704×576, 640×480)

60Hz: 30fps (1920×1080, 1280×720, 704×480, 640×480)

50Hz: 25fps (1920×1080, 1280×720, 704×576, 640×480)

60Hz: 30fps (1920×1080, 1280×720, 704×480, 640×480)

50 Hz: 25 fps (704 × 576, 640 × 480)

60Hz: 30fps (704x480, 640x480)

50Hz: 25fps (1920×1080, 1280×720, 704×576, 640×480)

60Hz: 30fps (1920×1080, 1280×720, 704×480, 640×480)

Main stream: H.265+/H.265/H.264+/H.264

Sub-stream/Third stream/Fourth stream/Fifth stream/custom stream:H.265/H.264/MJPEG

NAS (NFS, SMB/CIFS), auto network replenishment (ANR)

Together with high-end Hikvision memory card, memory card encryption and health detection are supported.

Plug-in required live view: IE8+

Plug-in free live view: Chrome 57.0+, Firefox 52.0+, Safari 11+

Local service: Chrome 41.0+, Firefox 30.0+

-IZHY:

1 input (line in), 3.5 mm connector, max. input amplitude: 3.3 vpp, input impedance: 4.7 KΩ, interface type: non-equilibrium; 1 output (line out), 3.5 mm connector, max. output amplitude: 3.3 vpp, output impedance: 100 Ω, interface type: non-equilibrium, mono sound

Upload to FTP/NAS/memory card, notify surveillance center, send email, trigger alarm output, trigger recording, trigger capture

Trigger recording: memory card, network storage, pre-record and post-record

Trigger captured pictures uploading: FTP, SFTP, HTTP, NAS, Email

Trigger notification: HTTP, ISAPI, alarm output, Email

Line crossing detection, up to 4 lines configurable

Intrusion detection, up to 4 regions configurable

Region entrance detection, up to 4 regions configurable

Region exiting detection, up to 4 regions configurable

Unattended baggage detection, up to 4 regions configurable

Object removal detection, up to 4 regions configurable

Scene change detection, audio exception detection, defocus detection

Detects up to 30 faces simultaneously;

Supports swing left and right from -60° to 60°, tilt up and down from -30° to 30°;

Up to 3 face libraries with up to 30000 faces each are configurable;

Recognizes face identity via face modeling, grading and comparing to those in face library;

Supports face library encryption.

Supports simultaneous detection of human body and face

Gets 8 face features and 13 human body features

Detects queuing-up people number, and waiting time of each person

Generates reports to compare the efficiency of different queuing-ups and display the changing status of one queue

Supports raw data export for further analysis

Line crossing, intrusion, region entrance, region exiting

Support alarm triggering by specified target types (human and vehicle)

Filtering out mistaken alarm caused by target types such as leaf, light, animal, and flag, etc.

12 VDC ± 20%, 1.33 A, max. 16.0 W, three-core terminal block, reverse polarity protection,

PoE: IEEE 802.3at, 42.5 V to 57 V, 0.43 A to 0.31 A，max. 18.0 W

Without -Y: Ø144 × 347 mm (Ø5.7″ × 13.7″)

With -Y: Ø140 mm × 351 mm (Ø5.5″ × 13.8″)