Power methodPoE, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range48V DC
Maximum power consumption5W
ES/EMP protectionAir: ±15kV, contact: ±8kV
SensorsProximity sensor
Loudspeaker(1) 8 ohm, 0.7W
LEDR/G/B/W (Learn more)
Button(1) Factory reset
NFC frequency13.56MHz
NFC reading range< 30mm
NFC technologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340), MIFARE Classic / MIFARE DESFIRE, Sony FeliCa™ (ID only), NFC Forum tags T1T, T2T, T3T, T4T and T5T, ECP 2.0
Work environmentOutdoor use
Operating ambient temperature-30 to 45° C (-22 to 113° F)
Ambient humidity5 to 90% non-condensing
Software informationThe software version of a product can be checked at https://unifi.ui.com
UL 294 levelDestructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I
UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE Cable RequirementsCat 5e cabling is the minimum recommended. The performance category should match the required transmission speed at the installation site. Minimum conductor gauge: 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.
CAN/ULC-60839-11-1 classGrade assignment: I
CertificatesCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Manufacturer
Ubiquiti
Manufacturer code
UBIQUAG3W
Weight
0.13 kg
Offensive and promotional comments are unpublished.