Power methodPoE, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range44-57V DC
Maximum power consumption5W
Sensor(12) Capacitive buttons
Loudspeaker(1) 8 ohm, 1W
LEDR/G/B/W
Button(1) Factory reset
NFC frequency13.56MHz
NFC reading range< 30mm
NFC technologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340), MIFARE Classic / MIFARE DESFIRE, Sony FeliCa™ (ID only), NFC Forum tags T1T, T2T, T3T, T4T, T5T, ECP 2.0
Work environmentOutdoor use
Operating ambient temperature-30 to 60° C (-22 to 140° F)
Ambient humidity5 to 90% non-condensing
Software informationThe software version of a product can be checked at https://unifi.ui.com
UL 294 levelDestructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I
UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE Cable RequirementsCable 5e cabling is the minimum performance category recommended. The performance category used should match the transmission speed required at the installation site. The minimum conductor gauge allowed to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.
CAN/ULC-60839-11-1 classGrade assignment: I
CertificatesCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision levelUA-G3-Flex V01
Manufacturer
Ubiquiti
Manufacturer code
UBIQUAG3FLEXW
Weight
0.228 kg
Offensive and promotional comments are unpublished.