Size217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'')
Total weight1.08 kg (2.38 lb)
Installation ModeDesk-Mounted,Wall-Mounted
Max. power consumption86W
Net weight0.54 kg (1.19 lb)
Working humidity5% to 95% (no condensation)
Working temperature0 °C to 40 °C (32 °F to 104 °F)
Power consumption in sleep mode2.5W
Energy source54VDC, 1.6A
Relative humidity5% to 95% (no condensation)
FrameMetal material
Storage temperature-40 °C to 85 °C (-40 °F to 185 °F)
Surge protection6 KV
Network settings
Internal cache memory1.5 Mbit
MAC address table4K
Packet forwarding speed14.88 Mpps
Connectors8 × Gigabit PoE port,2 × Gigabit RJ45 port
Switching capacity20Gbps
PoE
Max PoE port power30W
PoE portPoE: Ports 1 to 8
PoE power budget80W
PoE power connectorEnd span: 1/2(-), 3/6(+)
PoE standardIEEE 802.3af,IEEE 802.3at
Software features
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.2. Display the port bandwidth utilization rate.3. Display the PoE power usage.4. Display topology information.5. Display the alarm status.6. Restart ports and devices.7. Enable port long-rage mode.8. Remotely upgrade the device.
Connecting connectionsLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 3 aggregation groups.
Long range modePorts 1 to 8: up to 300 m. Long range performance may vary depending on camera model or cable condition.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP.
PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
Port insulationPorts 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
VLANsVLAN is used for network scale planning and network health improvement. Support 802.1Q.Configurable VLAN ID from 1-4094.Support Trunk, Access port mode. Support Max. 32 VLANs.
Manufacturer
Hikvision
Manufacturer code
SWITCHDS3E1510PEIMB
Weight
0.495 kg
Offensive and promotional comments are unpublished.