Brass battery terminal 600amp minus amio-01661

Brass battery clamp 1 pc, car battery clamp with voltage up to 12V. The clamps are made of brass, so they conduct electricity well and are not subject to corrosion. Such clamps are standardly installed in most car vehicles. Before installing or replacing the clamps, clean the battery connector thoroughly to obtain good contact and proper charging to avoid losses. Instructions for use: Remove the old clamps from the power cables. Clean the cables thoroughly to obtain the best possible connection. Loosen the clamping screws on the terminals. Insert the cables into the clamps, then tighten both clamp screws evenly so that the cables hold tightly and do not move. Attach the clamps to the car battery and press the screws firmly. NOTE: Do not hammer the clamps when attaching to the car battery to avoid damaging the battery.