Autotek ta1400 - single channel amplifier, rms power 1x400 watts at 2 ohms

The STREET MACHINE amplifier series sets a standard of its own - an economical machine designed for hard work on the street. They are to be efficient, economical, versatile and work tirelessly. And at the same time look neat. The STREET MACHINE amplifiers are just that. The series includes one model from each category: 1-, 2-, 4- and 5-channel. This gives you the ability to choose the right unit for each task, regardless of whether you want to power only the subwoofer, or the front speakers, or the front, rear and subwoofer at the same time.xa0The blue illuminated AUTOTEK logo will certainly be an interesting graphic element of the installation.The Autotek A1400 amplifier has solid screw terminals for connecting the power cables. The current protection is provided by two 25A fuses. The speaker cable terminals are also made using screw terminals.xa0The amplifier has one pair of RCA signal inputs.The amplifier also has a line signal output for connecting an additional amplifier.The equipment also includes a wired bass boost controller. It allows you to adjust the bass level from the driver's seat.xa0The Autotek A1400 amplifier has a number of control potentiometers for appropriate settings. You can adjust the crossover settings and bass boost. This allows the amplifier to be used in the following configurations:xa0- one or two subwoofers in mono modeBridge power 1 x 225 W at 4 Ohms or 1 x 400 W at 2 Ohms will perfectly drive all popular subwoofers with a power of up to 300-500 W. The built-in low-pass crossover allows for precise adjustment of the frequency response.xa0- one subwoofer in bridge/mono modeBridge power 1 x 250 W at 4 Ohms will perfectly drive all popular subwoofers with a power of up to 300-400 W. The built-in low-pass crossovers will allow for precise adjustment of the frequency response.Product parametersAmplifier type - number of channels: 1-channel mono amplifier RMS power at 4 Ohms: 1 x 225 W RMS power at 2 Ohms: 1 x 400 W RMS power at 1 Ohm: n/a Maximum power at 4 Ohms: 1 x 450 Watts Maximum Power @ 2 Ohms : 1 x 800 Watts Maximum Power @ 1 Ohms : n/a Bridgeable : no Master/slave capable : no Crossover settings : LP/BP - Full - HP High pass crossover / subsonic filter : adjustable between 20Hz - 50Hz Low pass crossover 1 ch : adjustable between 30Hz - 250Hz Full bandwidth : yes - FULL Stereo operation : no Bass boost : 0-12dB at 45Hz Damping factor : n/a Signal to noise ratio : 90dB Total harmonic distortion THD N. : 0.01% 1kHz Input sensitivity : 0.1V - 5V Input impedance : 47kOhm RCA line input : yes Hi-level input : no Signal output : yes RCA stereo, full range Remote bass control: yes, wired, controller included Diagnostic indicators: power supply / protection Class circuit: class A / B analog Current protection: 2 x 25A Dimensions (height-width-length): 223 x 63 x 250/276 mm Weight: 3.4 kg Autotek TA1400 - single-channel amplifier, RMS power 1x400 W at 2 Ohm - discover a completely new dimension of sound! Let's be honest, each of us appreciates high-quality sound, but achieving a satisfactory level can involve a lot of work and effort. If you are looking to modernize your current car audio system, you are certainly looking for a proven amplifier that will be characterized by high efficiency. This is where we appear with a brilliant proposition that will certainly not disappoint you. Autotek TA1400 - single-channel amplifier, RMS power 1x400 Watts at 2 Ohms is a great product with high functionality! It is with this equipment that you will make your car sound new.