Automatic light switch kawa-pro

Configurable Automatic Car Light Switch with Twilight Sensor - KAWA_PRO is a device dedicated to vehicles where LED daytime running lights are installed. The twilight sensor detects the light intensity and when it is not bright enough, automatically turns on the low beam and turns off the LED lights. Designed to work with LED daytime running lights that shine when it is bright. Turns on the low beam SM and parking lights SP in passenger cars when the voltage in the installation increases to 11V or 14V, and it is dark outside, or when it is bright, the daytime running lights SDz are turned on. Applying the handbrake (ground, +12V) blocks the low beam from switching on. Controls the low beam, parking and daytime running lights independently. Separated circuits for the right and left sides of the parking lights and low beam. Adapted to supply ground or +12V to the bulbs - independently for the parking lights and low beam. It has an input that detects when the main or parking lights are switched on - it switches off the dipped beam when the main beam is switched on - ground or +12V. The lights can be left on for 000 s to 999 s after the ignition is switched off - lighting the way home. +12V output for dashboard lighting. After exceeding the brightness threshold (programmable part), the SM and SP lights will be automatically switched off in the controller, and the SDz lights will be switched on. If the ambient brightness drops (programmable part), the SD main beam will be automatically switched off, and the SM dipped beam and SP parking lights will be switched on.