Excursion SX-6.3C - 3-way speaker set

Excursion SX-6.3C - 3-way 165mm component speaker system Excursion SX-6.3C is a 3-way car component speaker set from the series SX Street eXcursion The kit is designed for those who want to upgrade their factory sound system and achieve a more spacious, natural, and detailed sound in their car. The kit includes two 165mm woofers, a midrange/tweeter set, and SX-SAT, 4 PlugPlay crossovers, and mounting frames and panels. Thanks to the 3-way design, the frequency response is better distributed between the woofer, midrange driver, and tweeter. This translates into a better soundstage, clearer vocals, and greater control of the sound. 3-way set for a better soundstage. In classic 2-way sets, the midrange and high frequencies are divided between the woofer and tweeter. In this model Excursion SX-6.3C A separate 70mm midrange driver has been added. This makes vocals, guitars, instruments, and the upper midrange sound clearer. The SX-SAT system combines a midrange driver and tweeter in a single section. The close proximity of both drivers facilitates system tuning and improves sound stage coherence. Key benefits of the Excursion SX-6.3C

• 3-way car component speaker system,
• SX Street eXcursion series,
• 165 mm / 6.5 inch woofers,
• SX-SAT mid-high frequency set,
• 25 mm tweeters made of natural silk,
• 70 mm midrange speakers,
• 4 PlugPlay In-Line crossovers,
• Bi-Wiring and Bi-Amping configuration possible,
• RMS power 75 W,
• maximum power 200 W,
• impedance 4 Ohm,
• efficiency 90 dB,
• frequency response 55-20,000 Hz,
• MDF panels for permanent installation,
• Polish importer warranty 24 months.

SX-SAT - midrange and high frequencies in one sectionMidrange-high frequency set SX-SAT It consists of two 70mm midrange drivers and two 25mm tweeters. This solution allows for better sound source localization and a more organized stereo image. The set includes frames and mounting panels that facilitate permanent installation of the SX-SAT section. These can be used, for example, for mounting in the A-pillars of a car. This allows the midrange and high frequencies to be better directed towards the listener. Tweeters with a natural silk dome. The tweeters utilize 25mm diameter domes made of natural silk. The diaphragms are impregnated with a thin layer of anti-resonance material. This ensures that the high frequencies sound clear, detailed, and pleasant. An efficient neodymium magnetic system with a voice coil cooling system supports stable operation of the tweeters, especially when the set is operated at higher volumes or with an external amplifier. 70mm Midrange Drivers The SX-SAT midrange drivers have a diameter of 70mm. They utilize lightweight and rigid dual-cone ADC cones. The cones are made from two pressed layers of thin paper, which promotes a natural and detailed midrange sound. The upper suspension, made of double-pressed foam, ensures linear cone excursion across a wide frequency range. They are also UV-protected, ensuring stable operation and limiting unwanted distortion. The rigid pressed steel basket features large ventilation holes. An efficient EFF magnet system and a pure copper voice coil on an aluminum former support efficient operation and good heat dissipation. 165mm woofers - dynamic bass and natural midrange. The 165mm woofers are responsible for the bass and lower midrange. Their cones are made of two-layer coated paper. ADC, or Activ Damping Coating The coating limits resonances, reduces distortion, and additionally protects the diaphragm from moisture. Dust cover LXPD A phase-correcting design improves midrange detail and tonal balance. This is important in a car, as woofers are often mounted low in the doors and operate at a steep angle relative to the driver. A double-compressed foam upper surround allows for long, linear excursions. As a result, the system offers more bass, better efficiency, and lower distortion. EFF magnet system and voice coil cooling: The woofers feature an efficient magnet system. EFF, or Efficient Flux Field The central hole in the magnet lowers the resonance frequency and improves voice coil cooling. This solution helps maintain stable speaker operation under heavy loads. The voice coil is made of pure copper and precisely wound on an aluminum former. Copper conducts electricity very well, while aluminum effectively dissipates heat. This allows the speaker to operate efficiently and for a long time. Configurable PlugPlay Crossovers. The set includes 4 passive crossovers: 2