Excursion SX-5.3C - 3-way speaker set

Excursion SX-5.3C - 3-way 130mm component speaker system Excursion SX-5.3C is a 3-way component car speaker set from the series SX Street eXcursion This set is designed for drivers who want to upgrade their factory sound system and achieve a more spacious, detailed, and natural sound in their car. The set includes two 130mm woofers, a midrange and tweeter section. SX-SAT, 4 PlugPlay crossovers, and MDF mounting panels. Thanks to the 3-way design, the frequency response is better divided between the woofer, midrange driver, and tweeter. This improves the soundstage, vocals, and sound detail. 3-way design for a better soundstage. In a classic 2-way set, the woofer is primarily responsible for the midrange. In this model Excursion SX-5.3C An additional 70mm midrange driver is used. This allows vocals, instruments, and the upper midrange to sound clearer. Tweeters are responsible for the high frequencies, while 130mm woofers provide the sound's foundation. As a result, the system offers a more structured and spacious sound than a typical factory system. Key advantages of the Excursion SX-5.3C

• 3-way car component speaker system,
• SX Street eXcursion series,
• 130 mm / 5.25 inch woofers,
• SX-SAT mid-high frequency set,
• 25 mm tweeters made of natural silk,
• 70 mm midrange speakers,
• 4 PlugPlay In-Line crossovers,
• Bi-Wiring and Bi-Amping configuration possible,
• RMS power 60 W,
• maximum power 150 W,
• impedance 4 Ohm,
• efficiency 89 dB,
• frequency response 60-20,000 Hz,
• MDF panels for permanent installation,
• Polish importer warranty 24 months.

SX-SAT - midrange and high tones in one sectionMidrange-high tone set SX-SAT It consists of two 70mm midrange drivers and two 25mm tweeters. The close proximity of both drivers facilitates system tuning and helps achieve a coherent soundstage. Mounting frames and panels are included, making them suitable for installation in the A-pillars of a car, among other applications. This allows for better alignment of midrange and high frequencies towards the listener. Natural Silk Tweeters: The tweeters utilize 25mm diameter domes made of natural silk. The diaphragms are impregnated with a thin layer of anti-resonance material. This ensures clear, detailed, and pleasant high frequencies. An efficient neodymium magnetic system with a voice coil cooling system supports stable tweeter operation, which is important both for everyday listening and when working with an additional amplifier. 70mm Midrange Drivers: The SX-SAT midrange drivers have a 70mm diameter and utilize a lightweight and rigid ADC diaphragm with a double cone. The diaphragm is made of two pressed layers of thin paper. This construction supports a natural and detailed midrange and upper frequency range. The upper suspension, made of double-pressed foam, ensures linear operation of the diaphragm across a wide frequency range. Additional UV protection increases the durability of the suspension. A rigid steel basket with large openings improves airflow, and the EFF magnet system supports efficient operation of the speaker. 130 mm woofers - dynamic bass and natural midrange. The 130 mm woofers are responsible for the bass and lower midrange. Their diaphragms are made of lightweight and rigid, two-layer paper with a coating. ADC, or Activ Damping Coating The anti-resonance coating reduces distortion and protects the diaphragm from moisture. This makes the woofers suitable for automotive use and ensures a natural, balanced sound. Dust cover LXPD This phase-correcting design improves midrange detail at a wider listening angle. This is especially important when the woofers are mounted low in the door. EFF magnetic system and voice coil cooling. The woofers feature an efficient magnetic system. EFF, or Efficient Flux Field The central hole in the magnet lowers the resonant frequency and aids in voice coil cooling. The rigid pressed steel basket has large ventilation holes. Additional holes under the lower suspension improve airflow. This allows the voice coil to be better cooled and more resistant to higher loads. The voice coil is made of pure copper and precisely wound on an aluminum former. Copper conducts electricity well, while aluminum effectively dissipates heat. This combination supports efficient and long-lasting operation of the speaker. PlugPlay In-Line Crossovers: The set includes 4 passive crossovers: 2 for the power section. TW/MID and 2 switches for the section WO The crossovers operate at a slope of 6 dB/octave and are conveniently mounted on the speaker cables. High-quality MKP capacitors will improve