ARCTIC Liquid Freezer III PRO 240 A-RGB CPU cooler, black

Liquid Freezer III Pro 240 CPU cooler with A-RGB lighting. The entire Liquid Freezer III Pro cooler series is compatible with Intel (Alder Lake, Raptor Lake and Arrow Lake, LGA1700, LGA1851 sockets) and AMD (AM4, AM5) sockets. Features: Liquid Freezer III Pro is compatible with most mainstream Intel and AMD sockets. The new P12 Pro fans deliver higher performance at any speed. The P12 Pro is quieter and more powerful at low speeds, and has more headroom under load to provide maximum cooling. The premium radiator is 38 mm thick with a high density of fins. By increasing the cooling surface, heat dissipation is improved, as well as increasing the volume of the liquid. Water has a much higher heat capacity than aluminum or copper. As a result, heat build-up in the water cooling system is slowed down, and power and temperature peaks can be effectively managed for a longer period of time. With increased performance, operation remains quiet. Motherboard voltage converters often run at maximum temperatures when using power-hungry processors. Liquid Freezer III features an improved VRM fan. This PWM-controlled fan can almost silently cool the socket area when VRM cooling is insufficient, especially during increased CPU load (overclocking). The two connection cables provide two control options: the entire unit can be controlled via a single connector, meaning the pump, VRM and fans can be easily controlled with a single PWM setting. Another option: using a splitter, the pump, VRM and fans can be controlled independently of each other. This allows, for example, the VRM fan speed to be controlled independently of the processor and adjusted analogously to the temperature of the voltage converters using PWM. The Liquid Freezer III Pro is ready to use right out of the box, with fan cables integrated into the cable shroud, so there's only one cable to connect to the motherboard. Together with the included MX-6 thermal paste, you have everything you need for a quick and easy installation. The new ARCTIC A-RGB fans used in this model allow you to create perfectly coordinated multi-color lighting effects. A-RGB lighting capabilities are more advanced than RGB, allowing for more light and color effects at once to create a unique look for your system. Notes: Please check your case compatibility as Liquid Freezer III Pro requires at least 63mm clearance for installation. Some motherboards may not be compatible with Liquid Freezer III Pro due to the oversized SSD coolers in the M.2_1 slot. You can check compatibility here: https://support.arctic.de/lf3-compatibility. Used P12 Pro fans for better results: Higher static pressure increases cooling efficiency. Extended RPM range. Higher performance at any speed. Less vibration. Longer service life. High quality fluid dynamic bearing. A-RGB lighting effects. Technical data: Suction speed: 800 - 2800 RPM. Pump voltage/current: 12V DC/ 0.35A. Board material: copper. Pipe length: 450mm. Tube diameter: outer 12.4 mm, inner 6.0 mm. VRM fan speed: 400-2500 RPM (PWM controlled). VRM voltage/current: 12V DC/ 0.05A. Thermal paste: MX-6 (0.8g). Fan: 2x P12 Pro A-RGB. Fan speed: 600-3000 RPM. Airflow: 77 CFM / 131 m³/h. Connector: 4-Pin. Bearing: fluid dynamic bearing. Fan voltage/current: 12V DC/ 0.33A. Static pressure: 6.9 mm H2O. Dimensions: 277x120x38mm. Weight: 1665g. LED: 12x A-RGB Gen2 LEDs. RGB voltage/current: 5V DC/ 0.40A. Color: black body, optional lighting. Compatibility: AMD AM4. AMD AM5. Intel LGA1851. Intel LGA1700. Intel 1700. Warranty:6 years.