AJAX FireProtect 2RB, smoke, temperature and CO detector (black)

The compact and wireless 'Ajax FireProtect 2' with EN 14604 smoke, heat and CO gas (carbon monoxide) detection function is an essential safety measure for every home or office. Recognizes and reports real danger The detector not only detects smoke, but also records a sudden change in temperature in the room - when it increases to 64°C or rises above 10°C within one minute, as in the case of smoke detection, the detector siren is triggered. The smoke detector does not respond to water vapor. The carbon monoxide (fines) detector is designed to detect CO gas, which is colorless, tasteless, non-irritating and intangible. Breathing air with a high concentration of CO reduces the amount of oxygen in the bloodstream, which can cause dizziness, loss of consciousness and even death. A CO concentration of 400 ppm (0.04%) within 3 hours can be life-threatening. The detector stops sounding the alarm when the CO concentration drops to 50 ppm (0.005%) within one minute. Long distance is not an obstacle Thanks to Jeweler's unique communication technology, the Ajax FireProtect 2 glass break detector can be mounted up to 1,700 meters away from the Ajax Hub smart control panel - the signal will reach it without any problems. Easy to install and operate You can connect the Ajax FireProtect 2 smoke detector to your Ajax security system by scanning the QR code on the packaging with your smart device and following a few steps in the Ajax Security System app. In addition, the special SmartBracket holders make it very easy to attach the detector to vertical surfaces. Loud and on time The Ajax FireProtect 2 smoke detector has a built-in alarm, so in the event of a fire, it will start howling at a loudness of 85 dB. When the detector detects smoke, it immediately sends a signal to the smart control panel, which then alerts you with a message on your smartphone. Long-lasting battery The Ajax FireProtect 2 smoke detector operates on standard replaceable batteries. The device is extremely energy efficient, so one set of batteries will last up to 7 years. * Although Ajax FireProtect 2 does not require an Ajax smart panel, it is recommended to fully utilize the smoke detector's capabilities. You also need a smart device with an Android or iOS operating system. Technical data: Connection type: wireless. Purpose: indoor. Sensors: smoke + heat + CO (carbon monoxide). Supported control panels: Ajax Hub Plus, Hub 2 (2G), Hub 2 (4G), Hub 2 Plus, Hub Hybrid (2G), Hub Hybrid (4G), communication extenders: ReX, ReX 2. Temperature sensor: Class A1R, EN 54-5, BS 5446-2 standards; alarm >64°C / static temperature 54°C-65°C / >10°C rise in 1 min. Smoke sensor: dual spectrum optical sensor. CO (carbon monoxide) sensor: chemical. CO sensor sensitivity settings: <50PPM - alarm is not activated. 50PPM-100PPM - alarm within 90 minutes. 100PPM -300PPM- alarm within 40 min. >300PPM - alarm within 3 minutes. CO sensor operating time: 10 years. Alarm type: light and sound. Max. effective radiated power (ERP): 20mW. Communication protocol: Jeweller. Operating frequency: 868.0-868.6 MHz. LED indicators: x3 (conforms to EN 50291 standard; green/yellow/red colors indicate status). Detection distance: up to 1700 m (in open space). Power supply: 2x CR123A 3V batteries (installed). Battery life: up to 7 years. Operating temperature: from 0°C to +50°C. Operating humidity: < 80%RH. Dimensions: 123.7x123.7x44.7 mm. Safety class: IP20. Weight: 274.5 g. Color: black. Package: Smoke detector with SmartBracket holder. Batteries CR123A x2 (installed). User manual. Screw set. Warranty:24 months (excluding batteries).