Cable tracing and inspection kit

Cable locator and tester with audible indication
Features:
Professional cable tracing and diagnostic kit for determining cable routes, identifying a specific wire in a braid, checking circuit integrity, and diagnosing telephone lines.
The set consists of a transmitter and a receiver. The transmitter transmits a tone signal to the selected cable, and the receiver allows you to detect this signal and find the required cable or determine its route.
The device can be used to test cables up to 1.5 km away.
The two-tone signal makes it easier to distinguish the cable you are looking for from other nearby cables.
The receiver allows you to detect a signal transmitted by a cable without directly connecting to the conductor.
Can be used to test active telecommunications lines up to 48V DC.
The integrated headphone jack makes it easier to work in noisy environments.
The battery charge indicator warns you of a low battery.
The device can be used with telephone cables, twisted pair and network cables, Cat3 and other categories of data transmission cables, coaxial cables, audio and video signal cables, as well as single-core and multi-core wires.
The device is also suitable for searching and checking unconnected AC electrical wiring.
Features:
Allows you to find the route of a specific cable and identify the required cable among many other cables. The signal transmitter transmits a tone signal along the selected cable, and the receiver detects this signal in the cable route or cable bundle.
CONT mode is designed to check the integrity of wires and circuits. This function can be used to identify a broken wire, short circuit or incorrect connection.
TONE mode is used to transmit a tone signal to the cable and locate it. The receiver detects this signal in a non-contact manner, so the cable can be located without physically disconnecting it.
The device can also be used to diagnose analog telephone lines. It can determine whether a telephone line is free, busy, or ringing, as well as check the polarity of the line and identify the positive and negative conductors.
Note: Batteries are purchased separately.
Technical data:
Compatible cables: Non-voltage alternating current (AC) cables, telephone and twisted pair (TP) cables, all categories of data and voice cables, and other standard cables.
Tone signal frequency: 0.6-2 kHz.
Testing distance: max. 1.5 km
Transmitter operating current: max. 20 mA.
Receiver operating current: max. 70 mA.
Tone signal: 1/2 tone.
Modes: TONE / OFF / CONT (controlled by mechanical switch).
Transmitter connector: RJ11 (6P2C), crocodile clips.
Receiver connector: headphone jack.
Continuity limit: up to 10 Ohm.
Max. signal voltage: 8 Vp-p.
Voltage protection: 48V DC.
Power supply: Krona battery 9V DC (1 pc. for transmitter + 1 pc. for receiver, batteries not included).
Transmitter dimensions 57x56x32 mm.
Transmitter weight: 97 g.
Receiver dimensions: 235x55x25 mm.
Receiver weight: 116 g.
Warranty: 24 months



https://youtu.be/PIZ_tz8riXY?si=W7LVC3tesqy1lN54
Download user manual (pdf)