Adapter for steering wheel controls fiat scudo citroen c2 c3 c4 c5 c8 ds3, toyota proace verso, opel vivaro c. ctsct008.

Professional steering wheel control adapterThe device allows you to install a new radio and keep the factory steering wheel control buttons. This is a convenient solution that allows you to replace the radio without losing control of individual functions from the steering wheel.The steering wheel control adapter increases your safetyThe installed adapter will allow you to control the audio without taking your hands off the steering wheel. You will fully focus on the journey, ensuring the safety of yourself, passengers and other road users.Full compatibility - steering wheel control adapter for Citroen carsThe installation of the adapter does not interfere with the vehicle settings. Parking sensors will continue to work as before - also the date and time will not change, so there are only positive aspects to buying such a device! Keep the original functions of the steering wheel remote control, if you replace the factory radio with a universal radio (supporting steering wheel controls). Please compare the illustrated adapter connector with the one in your vehicle and make sure that you have a match optically and technically. Also check whether one of the listed factory radios has been installed in your vehicle! Notes: CANxa0Bus Only for vehicles with the following factory-installed radios: Blaupunkt, Continental, Siemens VDO RD4 - with rotary volume control Vehicles with OEM Clarion MQ-RD6 with monochrome display and central knob xa0The interface does not support the functions of the telephone buttons on the steering wheel. Keeps the factory parking sensor signals. Only models with rear parking sensors. xa0In vehicles without rear speakers but with rear parking sensors. xa0The speaker cables in the ISO connector must be swapped front and rear, otherwise the PDC will not emit a warning sound. xa0 Not for vehicles with Magneti Marelli (RT3), Continental (RD45) or Bosch HU. Not for vehicles with JBL sound system! Vehicles with PDC switch > PDC playback must be switched on Vehicles with ECO mode > +12V continuous current, fused battery terminal 30 *Vehicles with OEM RD45 LFB Citroen/Fiat/Peugeot/Toyota 40-pin Quadlock > Article: 42b-3444741 **Vehicles with OEM RD45 BMW/Citroen/Peugeot/Fiat/Ford/Volvo audible warning interface > Article: can-pdc ***Vehicles with PDC and OEM Clarion MQ-RD6 with monochrome display and central dial Make and model: Citroën Berlingo (7) 06/2008 - 03/2012 Citroën Berlingo (7) 04/2012 - 05/2015 Citroën Berlingo (7) 06/2015 - 06/2018 Citroën C2 (J) 12/2004 - 12/2009 Citroën C3 (F) 10/2005 - 01/2010 Citroën C3 (S) 01/2010 - 01/2017 Citroën C4 (L) 11/2004 - 08/2010 Citroën C5 (D) 10/2004 - 04/2008 Citroën C8 (E) 01/2008 - 07/2012 Citroën C8 (E) 07/2012 - 06/2014 Citroën DS3 (S) 03/2010 - 07/2014 Citroen Jumpy (X) 02/2007 - 05/2016 Citroen Jumpy (X) 09/2016 - 2023*** Citroen Spacetourer 03/2016 -2023*** xa0 Fiat Scudo (ZAF 270) 02/2007 - 07/2016 xa0 Opel Vivaro C (V) 09/2019 - 2023*** Opel Zafira Life V (V) 02/2019 - 2023*** xa0 Toyota Proace 03/2013 - 08/2016 Toyota Proace (V) 03/2016 - 2023*** Toyota Proace Verso (V) 03/2016 - 2023***Re-import of vehicles or vehicles with different software may have incompatible features. red: +12V ignition terminal 15 orange: +12V lighting terminal 58 purple/white: +12V feedback signal pink: speed signal green: GND parking brake signal ground Total output load capacity: max. 100 mA Current requirements greater than 100 mA:1 Relay coil resistance 75 Ohm min.2 Relay coil resistance 150 Ohm min.xa0Rear PDC supportedSupported vehicle settingsNote :xa0xa0SELECT THE RADIO CABLE YOU WANT TO INSTALL (PURCHASE SEPARATELY) ALPINE BLAUPUNKT BLAUPUNKT NEW YORK / xa0SONY CLARION JVC JVC KW-AVX KENWOOD NAKAMICHI / PHILIPS LG PANASONIC PANASONIC AV PARROT ASTEROID SMART PIONEER PIONEER AV ZENEC UNIVERSAL FORxa0CHINESExa0RADIOS Features and Advantages Allows you to fit an aftermarket OEM radio and retain the factory steering wheel controls Safety: Allows you to keep your hands on the wheel and focus on driving Plug and Play, no wire cutting required Retains original vehicle features such as date, time and temperature display Retains factory parking sensor signals (rear only).