Adapter for steering wheel control for fiat scudo citroen c2 c3 c4 c5 c8 ds3, toyota proace verso, opel vivaro c. ctsct008. rear

Professional adapter for steering wheel control. The device allows you to install a new radio and retain the factory steering wheel control buttons. This is a convenient solution that allows you to replace the radio without losing control of individual functions from the steering wheel. An adapter for controlling buttons from the steering wheel increases your safety. The installed adapter will allow you to control the audio without taking your hands off the steering wheel. You will fully focus on the journey, ensuring the safety of yourself, passengers and other road users. Full compatibility - steering wheel control adapter for Citroen cars. Installation of the adapter does not interfere with the vehicle settings. Parking sensors will work as before - the date and time will not change either, so purchasing such a device is only a positive aspect! Keep the original functions of the steering wheel remote control in case of replacing the factory radio with a universal radio (with steering wheel control support). Please compare illustrated adapter connector with the one in your vehicle and make sure you have it optically and technically matched. Also check if one of the listed factory ones has been installed in your vehicle radios!Notes: CAN Bus Only for vehicles with the following radios factory installed: Blaupunkt, Continental, Siemens VDO RD4 - with rotary volume control Vehicles with OEM Clarion MQ-RD6 device with monochrome display and central rotary knob The interface does not support the functions of the telephone buttons on the steering wheel. Retains factory parking sensor signals. Only models with rear parking sensors. In vehicles without rear speakers and with rear parking sensors. The speaker cables in the ISO connector must be swapped front and back, otherwise the PDC will not emit a warning sound. Not for vehicles with Magneti Marelli (RT3), Continental (RD45) or Bosch HU. Not for vehicles with JBL sound system! Vehicles with PDC switch > PDC playback must be enabled Vehicles with ECO mode > +12V continuous current, battery terminal 30 with fuse *Vehicles with OEM RD45 LFB device Citroen/Fiat/Peugeot/Toyota 40-pin Quadlock > Article: 42b-3444741 * *Vehicles with device warning audio interface RD45 OEM BMW/Citroen/Peugeot/Fiat/Ford/Volvo > Article: can-pdc ***Vehicles with PDC and OEM device Clarion MQ-RD6 with monochrome display and central dialBrand and model: Citroën Berlingo (7) 06/2008 - 03/2012 Citroën Berlingo (7) 04/2012 - 05/2015 Citroën Berlingo (7) 06/2015 - 06/2018 Citroën C2 (J) 12/2004 - 12/2009 Citroën C3 (F) 10/2005 - 01/2010 Citroën C3 (S) 01/2010 - 01/ 2017 Citroën C4 (L) 11/2004 - 08/2010 Citroën C5 (D) 10/2004 - 04/2008 Citroën C8 (E) 01/2008 - 07/2012 Citroën C8 (E) 07/2012 - 06/2014 Citroën DS3 (S) 03/2010 - 07/2014 Citroen Jumpy (X) 02/2007 - 05/2016 Citroen Jumpy (X) 09/2016 - 2023*** Citroen Spacetourer 03/2016 -2023*** Fiat Scudo (ZAF 270 ) 02/2007 - 07/2016 Opel Vivaro C (V) 09/2019 - 2023*** Opel Zafira Life V (V) 02/2019 - 2023*** Toyota Proace 03/2013 - 08/2016 Toyota Proace (V) 03/2016 - 2023*** Toyota Proace Verso (V) 03/2016 - 2023***Re-importing vehicles or vehicles with different software may have incompatible features. red: ignition terminal +12V 15 orange: lighting terminal +12V 58 purple/white: feedback signal +12V pink: speed signal green: handbrake signal ground GND Total load capacity of outputs: max. 100 mA. Current requirements greater than 100 mA: 1 resistance relay coil 75 Ohm min.2 Coil resistance relay 150 Ohm min. Supported rear PDCOsupported vehicle settingsNote: SELECT THE RADIO RECEIVER CABLE YOU WANT TO INSTALL (PURCHASE SEPARATELY) ALPINE BLAUPUNKT BLAUPUNKT NEW YORK / SONY CLARION JVC JVC KW-AVX KENWOOD NAKAMICHI / PHILIPS LG PANASONIC PANASONIC AV PARROT ASTEROID SMART PIONEER PIONEER AV ZENEC UNIVERSAL FOR CHINESE RADIO RECEIVERS Features and advantages Allows you to install a non-factory OEM radio and retain the factory steering wheel control buttons Safety: Allows you to keep your hands on the steering wheel and focus on driving the car Plug and Play, no cutting of wires required Retains original vehicle functions such as date, time and temperature display. Retains factory signals parking sensor (rear only).