Adapter for reversing camera fiat ducato (zaf 250) 11.2021 -

Fiat Rear View Camera InterfaceReversing camera adapters are required to retain the factory rear view camera.xa0They allow you to connect a factory-fitted camera to an aftermarket device with a camera input.Depending on the vehicle and equipment, the adapter provides a Cinch video signal, +6V/ground for the OEM camera and +12V reversing signal or must be connected in the appropriate place in the vehicle.Vehicles with a 360° camera system or systems with movable guide lines may not be compatible.xa0Before installation, check the correct assignment of the adapter to the OEM connector.xa0Many retrofit devices must be set to the camera function in the menu.Adapter for Fiat Ducato (ZAF 250) rear view camera 11.2021 ->, problems with a non-working camera will no longer bother you!A rear view camera is a really practical car accessory. Even true driving virtuosos appreciate their performance, because difficult conditions can be a challenge for anyone, regardless of experience behind the wheel. Adapter for Fiat Ducato (ZAF 250) 11.2021 reversing camera -> allows us to connect the factory camera to a non-original device. Brand and model: Fiat Ducato (ZAF 250) 11.2021 -> Connection: loose cables Connection: OEM camera Fakra(D) > Cinch(m) yellow Note: connector: loose wires connector: OEM camera Fakra L(f) > Fakra Z(m) connector: retrofit reversing camera input HU > RCA(f) yellow connection: red: +12V ignition terminal 15 with fuse black: GND terminal 31 green: +12V reverse gear signal input Camera signal: adjust the position of the voltage-free DIP switch camera type 1: DIP switch 1 off / 2 off / 3 off camera type 2: DIP switch 2 on / 2 off / 3 off camera type 3: switch DIP 2 off / 2 on / 3 offLED:red: interface in operationgreen: reversing signal activatedBlue: camera signal camera type correct