Adapter for rear view camera alfa romeo tonale, fiat ducato, tipo, 500, 500e, jeep compass.

This interface adds a rearview camera to your car and displays the image on your original car radio (which must be prepared for this). Some adapters are plug-and-play solutions, while others require splicing cables or other modifications. Please read the installation instructions beforehand or contact us with any questions. In addition to the adapter, you'll need a rearview camera. This video interface connects a rearview camera, a front camera, and two other video sources. Supports FBAS and AHD. Fits Alfa Romeo Tonale, Fiat 500 and 500e, Ducato3 (8 Series) and Tipo and Jeep Compass with Uconnect and 10 or 10.25-inch tablet. Product Features Video converter for digital rear view camera input 1 video input for AHD 720p PAL (cinch) rear view camera Automatic conversion of the AHD camera signal to the rear view camera input when reverse gear is engaged xa0 All video inputs are CVBS and AHD compatible. Brand and model: Alfa Romeo Tonale (965) 05.2022 -> Navigation: xa0Connect 10.25-inch or Connect NAV 10.25-inch - (R1 INT ER) with ultra-wide-angle tablet monitor with separate head unit xa0 Fiat Ducato 3 (8 Series) 2021 -> Fiat Tipo (356) 2023 -> Navigation: xa0Uconnect 5 R1 EXT ER with 10-inch tablet monitor and separate head unit xa0 Fiat 500 11.2020 -> Fiat 500e 11.2020 -> Navigation: xa0Uconnect 5 R1 EXT ER with 10.25-inch ultra-wide-angle tablet monitor with separate head unit xa0 Jeep Compass 2021 -> Navigation: xa0Uconnect5 R1 EXT ER with 10.1-inch Tablet Monitor with separate head unit xa0 Note: Not compatible with Jeep Compass from model year 2021 with Uconnect5 with 8.4-inch tablet monitor and all-in-one head unit. Limitations CAN bus compatibilityxa0 -xa0 CAN bus interface compatibility may be limited in its entirety for certain vehicles or for individual functions. This may be noticeable both during installation and later. The interface with all video inputs can be operated via analog switching signals without the need for connection to the vehicle's CAN bus. Individual additional functions have been omitted, see below. Video only -xa0The interface does not transmit any audio signals. To feed audio signals, any existing factory AUX audio input or optional products must be used (e.g. FM modulator). Factory rear view camera -xa0Automatic switching to the RFK input only occurs as long as reverse gear is engaged. Optional accessories are required for different switching times. Aftermarket front camera -xa0Switching to the front camera occurs automatically when reverse gear is disengaged for 5, 10, 15, or 20 seconds (depending on the OSD menu setting). Manual switching to the front camera is also possible using an external button. Route Lines -xa0If the vehicle's CAN bus is not fully compatible with the interface, the routing function cannot be used.Connections Image input: 4-pin HSD Power and CAN bus: Plug Play (vehicle dependent) Video inputs (2x): Cinch sockets Reversing camera input: RCA socket Front camera input: RCA socket Trigger cables (4x): Open cable endsTechnical Specifications Operating voltage 12 V DC (9~16 V) Current consumption 7mA Consumption 24 mA Input signal type CVBS/AHD Signal standard CVBS/AHD NTSC/PAL Operating temperature -40°C to +85°C Dimensions of interface box 117 x 30 x 108 mm (W x H x D)Legal NoticeVideoxa0 must not distract the driver, either directly or indirectly, while driving. In most countries/states, this is prohibited by law. Apart from operation when stationary, this product is only intended to display standing menus (e.g. MP3 menus from DVD players) or rear view camera images while driving.