Adapter for connecting the Toyota Gen5 / Gen6 reversing camera

Adapter for connecting a reversing camera for Toyota cars with MFD GEN5 and GEN6 multifunction displays. The cable offers Plug & Play installation without damaging the factory wiring. The image from the reversing camera will automatically be displayed on the screen when reversing. The device is connected to a 20-pin socket (see wiring diagram for GEN5, wiring diagram for GEN6). Once connected, all factory devices that work with this socket will not be disturbed and will function the same as before connection. The package includes a special cable for cars that do not have a rearview camera activation signal on the monitor and are not equipped with the rearview camera connection function by the manufacturer. Note! The power supply for the reversing camera must be obtained from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more precisely, on the voltage required for operation), a monitor output voltage of +6 V can be used. If the camera requires more than 6V, please connect it to the ACC line. COMPATIBILITY: Toyota Auris 2008 - 2014 Toyota Avensis 2006 - 2009 Toyota Corolla 2009 - 2010 Toyota Corolla Verso 2009 -> Toyota Hiace 2009 -> Toyota Hilux 2006 - 2011 Toyota iQ 2008 -> Toyota Land Cruiser C150 2009 - 2013 Toyota Prius 2009 - 2011 Toyota RAV4 2008 - 2011 Toyota Urban Cruiser 2009 -> Toyota Verso 2009 - 2011 Toyota Verso S 2006 - 2011 Toyota Yaris 2006 - 2011 GEN 5 System Radio TNS510 Toyota Auris 2006 - 2011 Toyota Avensis 2006 - 2009 GEN 5 System Radio B9030 (TNS700) , B9013 (TNS700) Toyota Avensis 2009 - 2011 Toyota Camry 2009 - 2012 Toyota Hightlander 2009 - 2012 Toyota Prius 2009 - 2012 Toyota RAV4 2009 - 2013 Toyota Verso 2009 - 2012 EU GEN6 System Radio B9012, B9018, B9028, B9016 / B9019, B9017, B9020 / B9029 Attention! Only NTSC cameras are supported.