

Adapter for connecting a Toyota Prius / Lexus RX rear view camera with a multifunction display mf5 gen5
Adapter for connecting a Toyota Prius / Lexus RX rear view camera with a multifunction display mf5 gen5
Guarantee
12 month
Delivery from Europe in
4 - 14
business days
Adapter for connecting a reversing camera - ToyotaRear camera toxa0function used by more and more car owners. It allows the driver to monitor the situation behind the vehicle on the screen, when reversing or reversing the car. Thanks to this, he has a better view of the cars behind him and the location of blind spots, such as trees or posts. However, to connect the reversing camera to the monitor, you need a special adapter, which you can buy in the car-tronic.pl store.Adapter for reversing camera for ToyotaThe adapter for connecting the reversing camera offered by us is compatible with Toyota cars equipped with multifunctional MFD GEN5 and GEN6 displays. The adapter can be easily installed using the Plug Play function, which does not require interfering with the original vehicle wiring. This cable allows you to connectxa0reversing camerasxa0in Toyota / Lexus cars with the 5th generation 5GEN OEM multimedia system.xa0The cable offers aftermarket Plug Play installation, without damaging the factory wiring.The image from the reversing camera will be automatically displayed on the screen when reversing.xa0The device is connected to the 40-pin socket (as shown inxa0the wiring diagramxa0).xa0After connection, all OEM devices that work with this socket will not be disturbed and will work the same as before the connection. Note!xa0The power supply for the reversing camera must be obtained from the ACC line (first turn of the key), otherwise the camera input will not be active.xa0Depending on the type of camera (more precisely, on the voltage required for operation), the +6 V monitor output voltage can be used.xa0If the camera requires more than 6 V, it must be connected to the ACC line.Note!xa0In some cases the head unit may not have a REVERSE wire.xa0In this case, you will need to extend the wire from the +12V tail lamp as the adapter will not work.xa0xa0COMPATIBILITY Lexus RX350 2007 - 2009 Lexus RX400h 2007 - 2008xa0 xa0 Toyota Prius 2006 - 2009 Toyota Prius Touring 2006 - 2009 Systemxa0xa0MFD GEN5xa0Cars with OEM navigation,xa0Cars without OEM navigation,xa0Cars without OEM parking assist function Note!xa0Only NTSC format cameras are supported.