Adapter for connecting a reversing camera for Toyota, Scion, Subaru 2010 -

Adapter for connecting a reversing camera - Toyota, Scion, SubaruThe rear camera is a functional accessory in modern cars that makes reverse parking and reversing safer and easier. However, in order for the driver to be able to view the image from the reversing camera on the screen in the cockpit, an adapter is required to connect the reversing camera. In which cars can the adapter be installed? The adapter we offer for connecting a rearview camera is intended for the factory Toyota monitor with Touch, Scion with the Bespoke system and Subaru with SD Navi system. Its installation does not affect car wiring in any way. The image from the camera is displayed automatically when reversing the car. The device is connected to a 16-pin socket, but in no way affects its factory functions. Adapter for connecting a rearview camera to the factory monitor Toyota with Touch, Scion with Bespoke system, Subaru with SD Navi system without damaging the car cables. With this cable you will be able to install an aftermarket Plug & Play camera. The image from the reversing camera will be automatically displayed on the screen when reversing. The device is connected to a 16-pin socket (as shown in the wiring diagram). Once connected, all factory functions that operate using this socket are retained. Attention! Additionally, the installed reversing camera should be powered from the ACC line (first key turn), otherwise the camera input will not be active. If the camera requires more than 6V, connect the camera power directly to the ACC line. Compatibility :ToyotaToyota Auris 2010 - 2014​Toyota Auris Hybrid 2010 - 2014​Toyota Avensis 2011 - 2014​Toyota Camry 2011 - 2014​Toyota Camry Hybrid 2011 - 2014​ Toyota Corolla 2011 - 2014​Toyota Fortuner 2011 - 2014​Toyota GT86 2012 - 2015​Toyota Highlander 2012 - 2014​Toyota Highlander Hybrid 2012 - 2014​Toyota Hilux 2011 - 2014​Toyota Matri x 2011 - 2014​Toyota Prius 2011 - 2014​Toyota Prius C 2012 - 2014 Toyota Prius MPV+ 2012 - 2014 Toyota Prius Plug-in Hybrid 2012 - 2014 Toyota RAV4 2010 - 2014 Toyota Tacoma 2012 - 2014 Toyota Venza 2013 - 2014 Toyota Verso 200 9 -2014Toyota Verso S 2010 - 2014Toyota Yaris 2011 - 2014Toyota Yaris Hybrid 2012 - 2014System / Monitor  Touch, Touch&Go, Touch&Go Plus 16-pin socket on monitor for adapter connectionScionScion FR-S 2013 - 2015Scion iQ 2013 - 2015Scion xB 2013 - 2015Scion xD 2013 - 2015Scion tC 2013 - 2015System / Monitor Bespoke 16-pin jack on monitor to adapter connectionSubaruSubaru BRZ 2013 - 2014Subaru FRS 2013 - 2014Subaru Forester 2012 - 2014Subaru Impreza 2012 - 2014Subaru Impreza WRX 2012 - 2014Subaru Trezia 2012 - 2014Subaru XV 2013 - 201 4Subaru XV Crosstrek 2013 - 2014Subaru WRX 2014 - 2015Subaru WRX STI 2014 - 2015SD Navi System FA601US FA632US FA732CSFE678USFE688US FE699USFF215KSFF605USFF615USFM201KSFM401LS FM412LSFM601US FM612USFM622US FM702USFM722USFP606USFV219KSFW602US16-pin socket on the monitor for connecting cablesNote! Only NTSC cameras are supported.