Adapter for connecting a rear view camera mitsubishi / fiat cars from 2013 - 2018

Reversing Camera Connection Adapter: Using our reversing camera adapter, you can install an aftermarket camera Plug Play without damaging the vehicle's wiring. It also provides the option to activate and configure the Active Parking Assistance (PAS) feature in the monitor's service menu. The image from the reversing camera will automatically be displayed on the screen when reversing your Mitsubishi. The device is connected to an 8-pin socket. Once connected, all OEM functions that operate via this socket are retained. Important information about the reversing camera adapter: An additionally installed reversing camera must be powered from the ACC line (first turn of the key), otherwise the camera input will not be active. Depending on the type of camera being connected, namely the voltage required for the camera, you can use the +6V input voltage generated by the monitor. If the camera requires more than 6V, the camera's power should be connected to the ACC line. Cable for connecting a rear view camera to Mitsubishi cars 2013-2018. Using this cable, you will be able to install an aftermarket camera Plug Play without damaging the car's wiring.xa0You will also be able to activate and configure the Active Parking Lines (PAS) function in the monitor's service menu.The image from the rear view camera will automatically be displayed on the screen when reversing.xa0The device is connected to an 8-pin socket.xa0After connection, all OEM functions that operate using this socket are retained.Attention!xa0An additionally installed rear view camera should be powered from the ACC line (first turn of the key), otherwise the camera input will not be active.xa0Depending on the type of camera being connected, namely the voltage required for the camera, you can use the +6V input voltage that the monitor produces.xa0If the camera requires more than 6V, connect the camera's power supply to the ACC line.COMPATIBILITY: Mitsubishixa0ASX 2013 -> Mitsubishixa0Challenger 2013 -> Mitsubishixa0Delica 2017 -> Mitsubishixa0Galant 2013 -> Mitsubishixa0I-MIEV 2014 -> Mitsubishixa0L200 2013 -> Mitsubishixa0Lancer 2013 -> Mitsubishixa0Lancerxa0Sportback 2014 -> Mitsubishi Lancer Evolution X 2014 -> Mitsubishixa0Lancer Mitsubishixa0Pajero Sport 2013 -> Mitsubishixa0RVR 2014 -> Mitsubishixa0Sportero 2015 -> Mitsubishi Triton 2014 -> Systemxa0MMCS SD with CD 7" "Mitsubishi Multi Communication Systemxa0(NR-242, E-11, E-12, E-13, E-14, E-15, E-17, J-11, J-12, J-13, J-14, J-15,xa0J-17, N-11, N-12, N-13, N-14, N-15, N-17, W -11, W-12, W-13, W-15, W-17) *xa0xa0Various models of MMCS SD CD 7'' Mitsubishi Multi Communication System, usually located in the upper right corner of the car radio. xa0 Link System 6.1 " MMCS SD CD 7'' Connect 7'' audio display with smartphone connection (EU) Connect 7'' audio display with smartphone connection (US)