Adapter for connecting a Nissan reversing camera with Connect 1/ 2/ 3 generation monitors (24036bg00a)

Adapter for connecting a reversing camera - what is it? We offer an adapter for connecting a rear camera for Nissan cars with Connect monitors from the 1st/2nd/3rd generation without damaging the original cables. The 24036BG00A adapter is used to connect reversing cameras in Nissan cars with the Connect OEM multimedia system from the 1st/2nd/3rd generation. Using this cable, we can install a Plug & Play reversing camera without damaging the car's wiring. How does a reversing camera work? The image from the reversing camera will be automatically displayed on the screen when reversing. The device is connected to a 24-pin socket (as shown in the wiring diagram). Once connected, all factory functions that operate using this socket are retained. Note! The installed reversing camera should be powered from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera you are connecting, namely the voltage required for the camera, you can use the +6 V input voltage that the monitor produces. If the camera requires more than 6V, connect the camera power to the ACC line. Adapter for connecting a rear camera for Nissan cars with Connect monitors from the 1st/2/3rd generation without damaging the original wires. The 24036BG00A adapter is used to connect reversing cameras in Nissan cars with the Connect system. 1st/2nd/3rd generation Connect OEM multimedia. Using this cable, we can install a Plug & Play reversing camera without damaging the car's wiring. The image from the reversing camera will be automatically displayed on the screen when reversing. The device is connected to a 24-pin socket (as shown in the wiring diagram). Once connected, all factory functions that operate using this socket are retained. Note! The installed reversing camera should be powered from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera you are connecting, namely the voltage required for the camera, you can use the +6 V input voltage that the monitor produces. If the camera requires more than 6V, connect the camera power to the ACC line. COMPATIBILITIES :Nissan Connect 1st GenerationNissan Almera 2011 - 2014 Nissan Cube 2011 - 2016Nissan Juke 2011 - 2014Nissan Micra 2011 - 2014Nissan Navara 2011 - 2014Nissan Note 2011 - 2014Nissan NV Cargo 2012 - 2014Nissan NV Passenger 2012 - 2014Nissan Rogue 2011 - 2014Nissan Tiida 2011 - 2014Nissan Qashqai 2011 - 2014Nissan X-Trail 2011 - 2014Cars with 5-inch OEM monitorNissan Connect 2/3 GenerationNissan Altima 2013 ->Nissan Frontier 2013 ->Nissan Juke 2014 ->Nissan Leaf 2014 ->Nissan Micra 2015 ->Nissan Murano 2014 ->Nissan Note 2014 ->Nissan NP300 Navara 2015 ->Nissan NV Cargo 2014 ->Nissan NV200 Taxi 2014 ->Nissan NV Passenger 2014 ->Nissan Pulsar 2014 ->Nissan Qashqai 2014 ->Nissan Rogue 2014 ->Nissan Rogue Select 2014 ->Nissan Sentra 2015 ->Nissan Titan 2013 ->Nissan Titan XD 2015 ->Nissan Versa Note 2014 ->Nissan Versa Sedan 2014 ->Nissan X-Trail 2014 ->Cars with 7 and 8-inch OEM monitorAttention! Only NTSC cameras are supported.Nissan Connect 2Nissan Connect 2 USNissan Connect 3Nissan Connect 3 US