Adapter do podłączenia kamery cofania Toyota GEN5 / GEN6

Rearview camera adapter for Toyota vehicles with GEN5 and GEN6 MFD multifunction displays. The cable offers Plug Play installation without damaging the factory wiring.

The image from the rearview camera will automatically be displayed on the screen when reversing. The device is connected to a 20-pin socket (see: GEN5 wiring diagram, GEN6 wiring diagram). Once connected, all factory devices that work with this socket will not be affected and will function as before the connection. The package includes a special cable for cars that do not have a rearview camera activation signal on the monitor and are not equipped with a rearview camera connection function by the manufacturer.

Attention! Power for the rearview camera must be obtained from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the camera type (more precisely, the voltage required for operation), the monitor's +6V output voltage can be used. If the camera requires more than 6V, it should be connected to the ACC line.

COMPATIBILITY:

• Toyota Auris 2008 - 2014
• Toyota Avensis 2006 - 2009
• Toyota Corolla 2009 - 2010
• Toyota Corolla Verso 2009 ->
• Toyota Hiace 2009 ->
• Toyota Hilux 2006 - 2011
• Toyota iQ 2008 ->
• Toyota Land Cruiser C150 2009 - 2013
• Toyota Prius 2009 - 2011
• Toyota RAV4 2008 - 2011
• Toyota Urban Cruiser 2009 ->
• Toyota Verso 2009 - 2011
• Toyota Verso S 2006 - 2011
• Toyota Yaris 2006 - 2011

GEN 5 Radio System TNS510

• Toyota Auris 2006 - 2011
• Toyota Avensis 2006 - 2009

GEN 5 System Radio B9030 (TNS700), B9013 (TNS700)

• Toyota Avensis 2009 - 2011
• Toyota Camry 2009 - 2012
• Toyota Highlander 2009 - 2012
• Toyota Prius 2009 - 2012
• Toyota RAV4 2009 - 2013
• Toyota Verso 2009 - 2012

EU GEN6 System Radio B9012, B9018, B9028, B9016 / B9019, B9017, B9020 / B9029

Note: Only NTSC format cameras are supported.