Adapter for connecting a reversing camera to toyota touch cy17 / cy19 / entune 3

Adapter for connecting a reversing camera to a monitor. A reversing camera is a functional car gadget that allows the driver to see the image from the camera located at the back of the car on the screen. This makes it easier for the driver when reversing or parking backwards, as he can clearly see the location of other cars and blind spots behind him, such as trees, garbage bins or poles. However, specific connectors are needed to connect the rear camera. Our offer includes an adapter for connecting a reversing camera to a monitor. How does the adapter for connecting a reversing camera work? The cable is designed to connect the rear camera to the OEM Toyota Touch CY17 / CY19 / Entune 3 monitor. Using this adapter, you can easily install Plug & Play on the camera without interfering with the car's wiring. The image from the rear camera is automatically displayed on the screen when reversing. . Once connected, all OEM functions that work using this socket are retained. Cable for connecting a reversing camera to an OEM Toyota Touch CY17 / CY19 / Entune 3 monitor. With this cable you will be able to install an aftermarket Plug&Play camera without damaging your car's wiring. Image from Reversing camera will be automatically displayed on the screen when reversing. The device connects to a 24-pin socket (as shown in the connection diagram). Once connected, all OEM functions operating using this socket are retained due to the pass-through connection type. Note! Additionally, the installed reversing camera should be powered from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera you are connecting, namely the voltage required for the camera, you can use the +6 V input voltage that the monitor produces. If the camera requires more than 6V, connect the camera power to the ACC line. Attention! Only NTSC cameras are supported. Compatibility :Touch 2 CY17 / CY19 (MM17 / MM19)Auris 2020->Camry 2018->C-HR 2019->Corolla 2019->Corolla Sedan 2019->Highlander 2020->Hilux 2020->Land Cruiser 150 2020->Mirai 2019->Prius 2019-?Prius Plug-In 2019->RAV4 2019->Yaris 2020->Attention! For European market cars with standard factory equipment.Entune 3Toyota Entune 3.0, Audio, Audio Plus, Premium Audio4Runner    2020->     Avalon    2019->Camry    2018->Corolla    2019->C-HR    2019->Highlander    2020->Hilux    20 20- >Mirai    2019->Prius    2019->Prius Plug-In    2019->RAV4    2019->Sequoia    2019->Sienna    2018->Tacoma    2019->Tundra    2019->RAV4 Prime 2021-2022 NOT COMPATIBLEAttention! For US and Canadian market cars with standard factory equipmentLink 2019Toyota Link 2019Camry    2018->        Corolla    2019-> C-HR    2019-> Granvia    2019-> HiAce    2019-> Prius    2019-> Prius v    2019-> RAV4    2019-> Attention! For cars for the Australian and New Zealand market with standard factory equipment. Note! Only cameras in NTSC format are supported. The photo is for illustration purposes only. The appearance of the control panel and monitor may vary slightly depending on the car model.