Adapter for reversing camera Fiat Ducato (zaf 250) 11/ 2021 -

Fiat Rear View Camera Interface Reverse camera adapters are required to retain the factory rear view camera. These allow you to connect a factory-equipped camera to an aftermarket device with a camera input. Depending on your vehicle and equipment, the adapter provides a Cinch video signal, +6V power/ground for the OEM camera, and a +12V reverse signal, or must be connected in a suitable location in vehicle. Vehicles with 360° camera systems or systems with moving guide lines may not be compatible. Before installation, please check the correct assignment of the adapter to the OEM connector. Many modernization devices should be set to the camera function in the menu. Adapter for the Fiat Ducato (ZAF 250) reversing camera 11/2021 ->, problems with a non-functioning camera will no longer bother you! The reversing camera is a really practical car equipment. Even true driving virtuosos appreciate their performance, because difficult conditions can be hard on anyone, regardless of experience behind the wheel. Adapter for the Fiat Ducato (ZAF 250) 11/2021 reversing camera -> allows us to connect the factory camera to a non-original device. Make and model: Fiat Ducato (ZAF 250) 11/2021 - 2022 NOTE: Connection: loose cables Connection: OEM camera Fakra(D) > Cinch( m) yellowConnection:Yellow: DC +12V terminal 30 protected Red: +12V ignition current terminal 15 protectedBlack: ground terminal 31Orange: +12V illumination Terminal 58 fused for AHD functionCamera signal:Cinch (m) yellow > CVBSCinch(m) yellow > AHD function Separate jumpers pink Cinch(m) yellow > AHD 1080P Function bridge pink/gray separately