Speed bump - Eurostal speed bump 30 cm wide inner part black

The inner part of the Eurostal speed bump is a high-quality "recumbent policeman" designed to limit vehicle speed and ensure safe traffic. The optimal height and shape of the bump encourages drivers to slow down so that the passage through it is smooth and gentle, which creates a safe and comfortable driving experience. They are usually installed where there is an emergency section of the road or intense pedestrian traffic, for example, in residential areas, parking lots, near schools, kindergartens, medical and other public institutions. They are also popular for installation in parking lots of shopping centers, gas stations and offices, on low and medium-intensity roads.

Advantages of modular design and materials

The 50 cm long, 30 cm wide and 4 cm high speed bump elements have a modular system. It allows you to connect the internal parts until the required length of the "cop-down" is reached. This option gives the structure versatility, which is easily adapted to the width of the road section. The non-slip pattern surface reduces the risk of rolling on slippery road surfaces, in rain or frost.

The inner part of the speed bump is made of extremely strong, high-quality recycled rubber, which is durable: resistant to deformation and wear, mechanical impact and harsh outdoor conditions. The structure remains functional and aesthetic even when exposed to UV rays, temperature fluctuations, humidity and mechanical pressure of up to 30 tons, making it suitable for year-round use.

Installation of the internal parts of the speed reducer

Installation of the inner parts of the speed reducer is quick, simple, and does not require specific knowledge, equipment, or preparation. They are fastened with anchor bolts. 4 pieces are required, which are not included in the product package. They can be conveniently purchased at the same time when shopping at the online store kelsa.lt

The installation site for the segmental "cop-down" must be flat, hard and clean. It is recommended to lay out the modules before installation to make sure that the intended length of the structure meets the needs and only then start the installation work. In addition, this helps to accurately drill the screw mounting holes in the paving areas. It is also necessary to leave enough space for the completion of the speed bump on both sides of the road, where 1 rear section will be installed.

The holes in the pavement are drilled through the pre-prepared mounting holes in the modules. The cavities in the pavement must correspond to the length and diameter of the anchor bolts used. The fastening elements inserted into the prepared mounting holes are easily and evenly rotated until there are no gaps between the coating and the hill. A properly installed segmental "cop" is stable, durable and ensures maximum safety throughout the entire period of use. It is provided with a 24-month warranty as standard.