Capacitor: electrolytic | THT | 10uF | 50VDC | Ø5x11mm | Pitch: 2.5 mm
01 Z-10/3F Endcap for IZ10/3F/57/N
Vibration isolation foot | ¨: 20 mm | H: 20 mm | Shore hardness: 55±5 | 320N
Capacitor: electrolytic | bipolar | THT | 10uF | 50VDC | Ø6.3x11mm | ±20%
Optocoupler | THT | Ch:1 | OUT: transistor | Uinsul:5.3kV | Current: 70V
Capacitor: electrolytic | THT | 47uF | 10VDC | Ø5x11mm | Pitch: 2mm | ±21
Capacitor: electrolytic; low impedance; THT; 10uF; 50VDC; ¨5x11mm
Switch: rotary | Position: 2 | SPDT | 3A/220VAC | 2A/24VDC | -20÷55°C | 50 m?
plug; wire-board; female NS39; 3.96mm; PIN: 2; w/o contacts; 250V
Resistor:wire | with radiator | 159 | 25W | ±5 % | 50ppm/°C
Operational amplifier | 700kHz | Channels:2 | DIP8 | 3÷32/±1,5÷16VDC ROHS
LED | SMD | 3528,PLCC4 | red | 71÷140mcd | 3.5x2.8x1.75 mm | 60° | 1.9÷2.6 V
Mounting clip | 94.02,94.03,94.04,94.54,94.72,94.73,94.75
Capacitor: electrolytic | bipolar | THT | 47uF | 6.3 V | Ø6.3x11mm | ±20%
Sbox adapter IPH/8 M. -> TYPE-C F. (AD.IPH-TYPEC)
plug; wire-board; female NS39; 3.96mm; PIN: 3; w/o contacts; 250V
Module: Adapter | LilyPad | RTC Battery | Size: CR2032
Capacitor: electrolytic; THT; 1000uF; 63VDC; ¨16x25mm; Pitch: 7.5mm
Capacitor: electrolytic | THT | 2.2uF | 400VDC | Ø8x11.5mm | ±20%
Resistor: wire-wound; with heatsink; 6?; 50W; ±5%; 50ppm/°C; 38.5mm
Wire | SiF | ballast | Cu | 1mm2 | silicone | black | -60÷180°C | 300/500V ROHS
Sensor: pulse oximeter | 3.3÷5VDC | MAX30101
Capacitor: electrolytic | bipolar | THT | 1uF | 50V | Ø5x11mm | Pitch: 2 mm
Capacitor: electrolytic | THT | 10uF | 63VDC | Ø5x11mm | Pitch: 2mm | ±20%
