Side cover | Poles: 1 | 10 pcs.
Flux: rosin-based | No Clean, RMA | resin | can | 20 years
LEDs; SMD; 3020, PLCC2; white cold; 2550÷3500 mcd; 5550-6040K; 90
Socket: DIP | PIN: 14 | 7.62 mm | THT | Pitch: 2.54 mm
Capacitor: polypropylene | 2.2uF | 600VDC | 37.5 mm | ±2 % | -25÷85°C
Module: actuator module | 0÷24VDC | IRF520 | 0÷5A | 3.3÷5V
Contact | Male | tinned | 0,0804÷0,325 mm2 | 26AWG÷22AWG | AES | 2A | 2,5 mm
Connector: wire-wire; DT; plow; border; Size: 16; 0.75÷2mm2; PIN: 4
Antenna mast; 0.28m; M5, M6; inside; AM, FM
Capacitor: electrolytic | THT | 10uF | 50VDC | Ø5x11mm | Pitch: 2.5 mm
01 Z-10/3F Endcap for IZ10/3F/57/N
Vibration isolation foot | ¨: 20 mm | H: 20 mm | Shore hardness: 55±5 | 320N
Capacitor: electrolytic | bipolar | THT | 10uF | 50VDC | Ø6.3x11mm | ±20%
Optocoupler | THT | Ch:1 | OUT: transistor | Uinsul:5.3kV | Current: 70V
Capacitor: electrolytic | THT | 47uF | 10VDC | Ø5x11mm | Pitch: 2mm | ±21
Capacitor: electrolytic; low impedance; THT; 10uF; 50VDC; ¨5x11mm
Switch: rotary | Position: 2 | SPDT | 3A/220VAC | 2A/24VDC | -20÷55°C | 50 m?
plug; wire-board; female NS39; 3.96mm; PIN: 2; w/o contacts; 250V
Resistor:wire | with radiator | 159 | 25W | ±5 % | 50ppm/°C
Operational amplifier | 700kHz | Channels:2 | DIP8 | 3÷32/±1,5÷16VDC ROHS
LED | SMD | 3528,PLCC4 | red | 71÷140mcd | 3.5x2.8x1.75 mm | 60° | 1.9÷2.6 V
Mounting clip | 94.02,94.03,94.04,94.54,94.72,94.73,94.75
Capacitor: electrolytic | bipolar | THT | 47uF | 6.3 V | Ø6.3x11mm | ±20%
Sbox adapter IPH/8 M. -> TYPE-C F. (AD.IPH-TYPEC)
