Bambu Smooth PEI Plate H2D / H2S

Bambu Smooth PEI Plate H2D/H2S

High Z-axis printing accuracy

Smooth PEI plate improves Z-axis accuracy during printing, resulting in greater vertical dimensional accuracy and consistency. It is an excellent choice for printing parts that require precise fit, alignment, and low tolerances.

Smooth and matte surface

Compatible with various filaments

The PEI plate is suitable for printing not only with common materials such as PLA, TPU and PETG, but also with high-temperature materials such as ABS and nylon.

Note: When printing with non-PLA filaments, use glue to prevent the sheet from tearing.

Reliable magnetic adhesion prevents deformation

The Bambu Smooth PEI plate is made of 0.5mm thick spring steel, which improves magnetic adhesion. This helps prevent warping and ensures high 3D printing quality. The plate also helps print larger models in warp-prone materials such as ABS, PC, and nylon.

Note: The Smooth PEI sheet cannot be peeled off the printing plate.

Important

• Using Smooth PEI with A1 increases the risk of curling corners or models coming off the plate. This is due to the thicker Smooth PEI layer, which increases the distance from the heating plate magnets and reduces magnetic attraction.
• If blisters appear on the underside of the sheet, heating it on a heating pad for several hours at a temperature of at least 80°C may help to remove them.
• Dust and grease on the printing plate reduce adhesion. To maintain the best adhesion, it is recommended to clean the surface regularly with detergent and water.
• Do not clean Smooth PEI with acetone as it will damage the PEI surface.
• Always wait a few minutes for the plate to cool before removing printed models. This will make it easier to remove the models, prevent damage to the plate, and make it last longer.
• Adhesion can be restored by carefully sanding the surface with fine-grit sandpaper (600 grit recommended).
• Smooth PEI sheet is a consumable part that will wear over time. The warranty only covers manufacturing defects and not cosmetic damage such as scratches, dents or cracks. The warranty only covers sheets that are already damaged upon delivery.

Recommended settings

Please note that other cutter settings can be adjusted based on the model being printed and filament requirements.