3D Printing Filament - ELEGOO PLA Marble 1 kg Gray
Product reference: 14-6976021769575

ELEGOO PLA Marble filament spool, marble color, has a diameter of 1.75 mm, has a dimensional tolerance of ±0.02 mm and weighs 1 kg. It is suitable for printing decorative models, figurines and architectural models; recommended printing temperature - 190-230 °C, heated base - 35-65 °C.

  • −9%
3D Spausdintuvo Kaitinimo Siūlas - ELEGOO PLA Marble 1 kg Marmuras
3D Spausdintuvo Kaitinimo Siūlas - ELEGOO PLA Marble 1 kg Marmuras
3D Spausdintuvo Kaitinimo Siūlas - ELEGOO PLA Marble 1 kg Marmuras

3D Printing Filament - ELEGOO PLA Marble 1 kg Gray

Product reference: 14-6976021769575

ELEGOO PLA Marble filament spool, marble color, has a diameter of 1.75 mm, has a dimensional tolerance of ±0.02 mm and weighs 1 kg. It is suitable for printing decorative models, figurines and architectural models; recommended printing temperature - 190-230 °C, heated base - 35-65 °C.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
27,91 €
30,67 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
15 - 16
business days

Your message has been successfully sent!
Fill in the required fields*
Not available

ELEGOO PLA Marble 1 kg marble color


ELEGOO PLA Marble marble-colored filament has a diameter of 1.75 mm, dimensional tolerance - ±0.02 mm, and a spool contains 1 kg of filament. Suitable for printing decorative models, figurines, and architectural models. Printing temperature - 190-230 °C, heated base temperature - 35-65 °C.


  • Marble-colored PLA filament for creating decorative models, figurines and architectural models, giving a realistic stone look.
  • The 1.75 mm diameter and ±0.02 mm dimensional tolerance ensure smooth, even feeding and reliable printing.
  • Easy to print, good adhesion to the substrate, less filament formation. Recommended nozzle temperature - 190-230 °C.
  • The filament is supplied on a recyclable cardboard spool, neatly wound with 1 kg of filament, and has three fill level inspection holes.

Product information

Product type PLA filament for 3D printer
Brand ELEGOO
Model 50.203.0113
Color Marble
Material PLA (polylactic acid)
Thread weight 1kg
Coil material Recyclable cardboard

Recommended print settings

Drying temperature 55 ± 5°C
Storage conditions At temperatures up to 50 °C and relative humidity up to 20%; store with a desiccant
Compatible printing surface Textured PEI or other compatible 3D printing surface
Maximum recommended print speed Less than 300 mm/s

Material properties

Density 1.26 g/cm³
Melting point 158 °C
Deformation temperature under load 57 °C
Vicat softening temperature 62 °C

Mechanical properties

Tensile strength (XY) 38 ± 3 MPa
Elongation at break (XY) 10.5% ± 2.1%
Bending strength (XY) 72 ± 5 MPa
Flexural modulus (XY) 2993 ± 182 MPa
Impact resistance (XY) 66.2 ± 3.9 kJ/m²

Safety information

Safety warning Use only with a compatible 3D printer and follow the printer and filament manufacturer's instructions for use. The nozzle, heated bed, and freshly printed parts may be hot, so do not touch them during or immediately after printing. Keep filament and printer out of reach of children and use in a well-ventilated area.

Height220mm
Length220mm
Weight1200g
Width220mm
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial