3D Printing Filament - ELEGOO PETG-CF 0.5 kg Gray
Product reference: 14-6932704920299

Gray PETG-CF filament for FDM 3D printing is reinforced with carbon fiber, which provides increased stiffness, strength and abrasion resistance. The recommended extruder nozzle temperature for a 0.5 kg spool is 240-270 °C and the print platform temperature is 65-75 °C.

3D Spausdintuvo Kaitinimo Siūlas - ELEGOO PETG-CF Kaitinimo Siūlas 0,5 kg Pilkas

3D Printing Filament - ELEGOO PETG-CF 0.5 kg Gray

Product reference: 14-6932704920299

Gray PETG-CF filament for FDM 3D printing is reinforced with carbon fiber, which provides increased stiffness, strength and abrasion resistance. The recommended extruder nozzle temperature for a 0.5 kg spool is 240-270 °C and the print platform temperature is 65-75 °C.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
28,19 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
15 - 16
business days

Your message has been successfully sent!
Fill in the required fields*
Not available

ELEGOO PETG-CF filament 0.5 kg, gray


Gray PETG-CF filament for FDM 3D printers. Reinforced with carbon fiber, it has increased stiffness, strength and abrasion resistance. The recommended nozzle temperature for a 0.5 kg spool is 240-270 °C and the print bed temperature is 65-75 °C.


  • PETG-CF filament for FDM 3D printers, reinforced with carbon fiber for increased stiffness, strength and abrasion resistance
  • Matte gray finish helps reduce the visibility of layer lines and gives prints a professional, technical look
  • Low shrinkage and minimal warping ensure stable, accurate and repeatable printing
  • 0.5 kg vacuum-packed spool, compatible with most FDM 3D printers; recommended nozzle temperature: 240-270 °C

Product information

Product type PETG-CF filament for FDM 3D printers
Brand ELEGOO
Model 50.203.0648
Color Gray
Net weight 0.5 kg

Material properties

Material PETG, reinforced with carbon fiber
Density 1.29 g/cm³
Melting point 226 °C
Vicat softening temperature 83 °C
Thermal deformation temperature 74 °C
Tensile strength (XY) 51 ± 8 MPa
Elongation at break (XY) 9.6% ± 1.0%
Flexural modulus (XY) 3340 ± 21 MPa
Bending strength (XY) 85 ± 2 MPa
Impact resistance (XY) 70.7 ± 6.2 kJ/m²

Packaging and compatibility

Coil dimensions 45 × 200 mm
Packaging Vacuum-packed coil
Compatibility with printers Most FDM 3D printers
Surface finish Matte gray carbon fiber texture

Safety information

Safety warning Use only with a compatible FDM 3D printer and follow the printer and filament manufacturer's instructions for use. The nozzle, build plate, and molten filament become very hot during printing, so avoid contact and keep out of reach of children. Carbon fiber reinforced filament can be abrasive, so use a hardened nozzle suitable for abrasive materials.

Height220mm
Length60mm
Weight600g
Width60mm
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial