ANYCUBIC ABS-Like Resin Pro 2 - gray photopolymer resin for LCD and DLP 3D printers using 365-405 nm ultraviolet light. The elongation at break of 1 kg of resin is 35-40%, and the viscosity is 300-400 mPa·s.
ANYCUBIC ABS-Like Resin Pro 2 - gray photopolymer resin for LCD and DLP 3D printers using 365-405 nm ultraviolet light. The elongation at break of 1 kg of resin is 35-40%, and the viscosity is 300-400 mPa·s.


ANYCUBIC ABS-Like Resin Pro 2 - gray photopolymer resin for LCD and DLP 3D printers using 365-405 nm ultraviolet light. The elongation at break of 1 kg of resin is 35-40%, and the viscosity is 300-400 mPa·s.
Guarantee
24 month
Delivery from Europe in
15 - 16
business days
ANYCUBIC ABS-Like Resin Pro 2 - gray photopolymer resin for LCD and DLP 3D printers using 365-405 nm UV light. The elongation at break of 1 kg of resin is 35-40%, and the viscosity is 300-400 mPa·s.
Features | |
|---|---|
| Product type | Photopolymer resin for LCD and DLP 3D printers |
| Brand | ANYCUBIC |
| Model | ABS-Like Resin Pro 2 |
Technical data | |
| Material | Photopolymer resin |
| Density | 1.05-1.25 g/cm³ |
| Hardness | 82-84 HD |
| Tensile strength | 35-45 MPa |
| Flexural modulus | 40-45 MPa |
| Bending strength | 1,400-1,800 MPa |
| Jung's module | 1,600-1,800 MPa |
| Izod impact strength | 212 J/m |
| Volumetric shrinkage | 4.3-5.6% |
| Printing temperature | 20-50°C |
| Recommended ambient temperature | 20-40 °C |
| Exposure time of the first layer | 20-40 seconds |
| Exposure time of a normal layer | 1.5-3 seconds |
| Cleaning agent | 95% IPA |
| Minimum washing time | 3 minutes |
| UV wavelength during final curing | 405 nm |
| Temperature during final curing | 18-30 °C |
| UV light | 25,000-30,000 µW/cm² |
| Final curing time | 3 minutes |
| Safety warning | Use only as intended - as a resin for a 3D printer. Avoid contact with skin and eyes, and follow the printer and resin manufacturer's instructions for use, washing, and curing. |
| Height | 220mm |
| Length | 120mm |
| Weight | 1200g |
| Width | 120mm |