- New
"eSUN PLA-Silk Magic" - black and purple PLA filament, providing a glossy two-tone effect. The 1.75 mm diameter filament is supplied on a 1 kg spool; it is recommended to print at a temperature of 190-230 °C, after heating the heated base to 45-60 °C.
"eSUN PLA-Silk Magic" - black and purple PLA filament, providing a glossy two-tone effect. The 1.75 mm diameter filament is supplied on a 1 kg spool; it is recommended to print at a temperature of 190-230 °C, after heating the heated base to 45-60 °C.
"eSUN PLA-Silk Magic" - black and purple PLA filament, providing a glossy two-tone effect. The 1.75 mm diameter filament is supplied on a 1 kg spool; it is recommended to print at a temperature of 190-230 °C, after heating the heated base to 45-60 °C.
Guarantee
24 month
Delivery from Europe in
15 - 16
business days
"eSUN PLA-Silk Magic" - black and purple PLA filament, creating a glossy two-color effect. The 1.75 mm diameter filament is supplied on a 1 kg spool. The recommended printing temperature is 190-230 °C, and the heated platform temperature is 45-60 °C.
Features | |
|---|---|
| Product Type | PLA Filament for 3D Printer |
| Brand | eSUN |
| Model | PLA-SKMG175B-BZ1P1 |
| Filament Type | PLA-Silk Magic |
Technical information | |
| Heated build plate | Required |
| Recommended print speed | Less than 200 mm/s |
| Heat distortion temperature | 54.7 °C |
| Melt flow rate | 4.5 g/10 min. (190 °C / 2.16 kg) |
| Tensile strength (Z) | 12.82 MPa |
| Elongation at break (Z) | 1.47% |
| Flexural strength (XY) | 64.2 MPa |
| Flexural modulus (XY) | 2,486.54 MPa |
| IZOD Impact Strength (XY) | 2.87 kJ/m² |
Safety Warning | |
| Intended Use | For use as a 3D printer filament with compatible FDM equipment only. Keep away from high temperatures; hot filament and printer parts can cause burns. Keep out of reach of children. |
| Height | 220 mm |
| Length | 220 mm |
| Weight | 1200 g |
| Width | 220 mm |