3D Printing Filament - eSUN PLA-SK175S1P1 1.75 mm 1 kg Silver
Product reference: 14-6922572204270

Silver " eSUN PLA-Silk" plastic for FDM 3D printing is 1.75 mm in diameter and is wound on a 1 kg spool. It helps to produce glossy, silky prints; recommended nozzle temperature is 190-230 °C.

3D Printing Filament - eSUN PLA-SK175S1P1 1.75 mm 1 kg Silver

Product reference: 14-6922572204270

Silver " eSUN PLA-Silk" plastic for FDM 3D printing is 1.75 mm in diameter and is wound on a 1 kg spool. It helps to produce glossy, silky prints; recommended nozzle temperature is 190-230 °C.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
33,29 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
15 - 16
business days

Your message has been successfully sent!
Fill in the required fields*
Not available

eSUN PLA-SK175S1P1 1.75 mm, 1 kg, silver


Silver " eSUN PLA-Silk" plastic filament is designed for FDM 3D printing. Its diameter is 1.75 mm, and the spool contains 1 kg of filament. It gives prints a glossy, silk-like surface. Recommended nozzle temperature is 190-230 °C.


  • Silver " eSUN PLA-Silk" plastic filament for decorative 3D models, characterized by a smooth and shiny surface.
  • 1.75 mm diameter, compatible with FDM 3D printers.
  • Easy to print, low shrinkage, good layer adhesion.
  • The thread is available in a 1 kg spool. Suitable for printing figurines, vases, jewelry and other display models.

Features

Product type FDM 3D printer plastic filament
Brand eSUN
Plastic thread type PLA-Silk
Material PLA
Surface Glossy, silky sheen

Technical information

Nozzle temperature 190-230 °C
Heated base temperature 45-60 °C
Recommended print speed 40-100 mm/s
Cooling 100%
Density 1.21 g/cm³
Melt flow index 4.8 g/10 min. (190 °C / 2.16 kg)
Tensile strength 52 MPa
Elongation at break 14.4%
Bending strength 65 MPa
Flexural modulus of elasticity 1447 MPa
Impact strength according to the Izod notched method 5.86 kJ/m²
Thermal deformation temperature 50 °C
Safety warning Use only for its intended purpose and with a compatible FDM 3D printer. The nozzle and heated bed become hot during operation - do not touch them. Protect the filament and printed parts from high heat.

Height220mm
Length220mm
Weight1200g
Width220mm
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial