3D printing filament - eSUN PLA-SK175O-IO1P1 1.75 mm 1 kg rose gold color
Product reference: 14-6922572204294

eSUN PLA-Silk - 1.75 mm PLA filament for FDM 3D printers, supplied in a 1 kg spool, rose gold color. Prints have a glossy, silky surface; recommended nozzle temperature - 190-230 °C.

3D printing filament - eSUN PLA-SK175O-IO1P1 1.75 mm 1 kg rose gold color

Product reference: 14-6922572204294

eSUN PLA-Silk - 1.75 mm PLA filament for FDM 3D printers, supplied in a 1 kg spool, rose gold color. Prints have a glossy, silky surface; recommended nozzle temperature - 190-230 °C.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
33,29 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
15 - 16
business days

Your message has been successfully sent!
Fill in the required fields*
Not available

eSUN PLA-SK175O-IO1P1 1.75 mm, 1 kg, rose gold color


eSUN PLA-Silk is a 1.75 mm diameter PLA plastic filament for FDM 3D printers. It is supplied in a 1 kg spool, in rose gold color. The prints have a glossy, silky surface. Recommended printing temperature - 190-230 °C.


  • eSUN PLA-Silk plastic filament for FDM 3D printing, 1.75 mm diameter, 1 kg spool.
  • The rose gold color, glossy and silky surface is suitable for printing decorative products.
  • It is easy to print, has low shrinkage and good layer adhesion, resulting in consistent results.
  • Suitable for figurines, vases, jewelry and other models where appearance is important.

Product information

Product type PLA-Silk plastic filament for 3D printer
Brand eSUN
Model PLA-SK175O-IO1P1
Material PLA
Color Rose gold
Surface Shiny, silky
Printing technology FDM

Technical information

Heated platform temperature 45-60 °C
Recommended print speed 40-100 mm/s
Cooling 100%
Density 1.21 g/cm³
Melt flow index 4.8 g/10 min (190 °C / 2.16 kg)
Tensile strength 52 MPa
Elongation at break 14.4%
Bending strength 65 MPa
Flexural modulus of elasticity 1,447 MPa
Izod impact strength with notch 5.86 kJ/m²
Thermal deformation temperature 50 °C
Safety warning Use only with a compatible FDM 3D printer and follow the printer and filament manufacturers' instructions for use. Hot nozzle and platform can cause burns; use in a well-ventilated area.

Height220mm
Length220mm
Weight1200g
Width220mm
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial