- New
" eSUN " green PLA-Silk plastic is designed for FDM 3D printing, its diameter is 1.75 mm, and the prints have a glossy, silky surface. For a 1 kg roll, the recommended nozzle temperature is 190-230 °C and the printing substrate temperature is 45-60 °C.
" eSUN " green PLA-Silk plastic is designed for FDM 3D printing, its diameter is 1.75 mm, and the prints have a glossy, silky surface. For a 1 kg roll, the recommended nozzle temperature is 190-230 °C and the printing substrate temperature is 45-60 °C.
" eSUN " green PLA-Silk plastic is designed for FDM 3D printing, its diameter is 1.75 mm, and the prints have a glossy, silky surface. For a 1 kg roll, the recommended nozzle temperature is 190-230 °C and the printing substrate temperature is 45-60 °C.
Guarantee
24 month
Delivery from Europe in
15 - 16
business days
Green eSUN PLA-Silk plastic is designed for FDM 3D printing. Its diameter is 1.75 mm, and the surface is glossy, silky. When printing, the recommended nozzle temperature is 190-230 °C and the heated base temperature is 45-60 °C. The spool contains 1 kg of plastic.
Features | |
|---|---|
| Product type | 3D printer plastic |
| Brand | eSUN |
| Plastic type | PLA-Silk |
| Material | PLA |
| Color | Green |
| Surface | Shiny, silky |
Technical data | |
| Printing technology | FDM |
| Printing speed | 40-100 mm/s |
| Cooling | 100% |
| Density | 1.21 g/cm³ |
| Melt flow index | 4.8 g/10 min. (190 °C / 2.16 kg) |
| Tensile strength | 52 MPa |
| Elongation at break | 14.4% |
| Bending strength | 65 MPa |
| Bending modulus | 1447 MPa |
| Izod impact strength with notch | 5.86 kJ/m² |
| Heat distortion temperature | 50 °C |
| Safety warning | Use only for its intended purpose, in a compatible FDM 3D printer. The nozzle and heated bed become hot during printing - do not touch them and keep them out of the reach of children. |
| Height | 230mm |
| Length | 230mm |
| Weight | 1200g |
| Width | 230mm |