3D Printing Filament - eSUN PLA-Matte Rainbow 1.75 mm 1 kg Yellow-Pink-Purple
Product reference: 14-6922572223417

" eSUN PLA-Matte Rainbow" - 1.75 mm diameter matte surface 3D printing filament, the color of which gradually changes from yellow to pink and purple. 1 kg roll is designed for printing at a nozzle temperature of 210-230 °C, with the fan operating at full capacity.

3D Printing Filament - eSUN PLA-Matte Rainbow 1.75 mm 1 kg Yellow-Pink-Purple

Product reference: 14-6922572223417

" eSUN PLA-Matte Rainbow" - 1.75 mm diameter matte surface 3D printing filament, the color of which gradually changes from yellow to pink and purple. 1 kg roll is designed for printing at a nozzle temperature of 210-230 °C, with the fan operating at full capacity.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
37,82 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
15 - 16
business days

Your message has been successfully sent!
Fill in the required fields*
Not available

eSUN PLA-Matte Rainbow 1.75 mm, 1 kg, yellow, pink and purple colors


" eSUN PLA-Matte Rainbow" - 1.75 mm diameter 3D printer filament, the color of which gradually changes from yellow to pink and purple. It has a matte surface. The 1 kg roll is designed for printing at a temperature of 210-230 °C, using 100% fan speed.


  • Matte PLA filament for 3D printing, in transitional yellow, pink and purple colors.
  • Helps produce smooth-looking prints with a subtle surface that reduces visible reflections.
  • Suitable for printing decorative models, figurines, costume props and prototypes.
  • Supplied on a 1 kg roll; filament diameter - 1.75 mm.

Features

Product type 3D printer filament
Brand eSUN
Model PLA-Matte Rainbow
Material Matte PLA
Surface Matte

Technical data

Density 1.329 g/cm³
Platform temperature 65 °C
Recommended printing surface PEI
Recommended nozzle diameter 0.4mm
Maximum print speed Less than 300 mm/s
Drying is recommended at 60 °C for more than 8 hours.
Thermal deformation temperature 50.2 °C at 0.45 MPa pressure
Tensile strength XY: 39.81 MPa; Z: 16.23 MPa
Elongation at break XY: 5.75%; Z: 1.80%
Bending strength XY: 65 MPa; Z: 26.6 MPa
UV resistance No
Recommended use For indoor printing of decorative models, figurines, costume props and prototypes
Safety warning Use only for its intended purpose and with a compatible 3D printer. Printed parts may warp at high temperatures, so keep them away from heat and direct sunlight. The filament is not resistant to UV rays, acids, and alkalis.

Height250mm
Length250mm
Weight1300g
Width250mm
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial