3D printing filament - eSUN PLA-Matte 1.75 mm 1 kg Red
Product reference: 14-6922572203358

The red " eSUN PLA-Matte" filament for FDM 3D printing has a diameter of 1.75 mm and is available in a 1 kg spool. It can be used to print with a matte surface using a nozzle temperature of 190-230 °C and a print bed temperature of 45-60 °C.

3D printing filament - eSUN PLA-Matte 1.75 mm 1 kg Red

Product reference: 14-6922572203358

The red " eSUN PLA-Matte" filament for FDM 3D printing has a diameter of 1.75 mm and is available in a 1 kg spool. It can be used to print with a matte surface using a nozzle temperature of 190-230 °C and a print bed temperature of 45-60 °C.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
32,12 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
15 - 16
business days

Your message has been successfully sent!
Fill in the required fields*
Not available

eSUN PLA-Matte 1.75 mm 1 kg red


Red eSUN PLA-Matte filament for FDM 3D printing has a diameter of 1.75 mm and is supplied on a 1 kg spool. It is used to print models with a matte surface. Recommended nozzle temperature is 190-230 °C and substrate temperature is 45-60 °C.


  • Red eSUN PLA-Matte filament for FDM 3D printers, supplied on a recyclable cardboard spool.
  • Creates a smooth matte surface, making layer lines less visible.
  • Ensures good layer adhesion, low deformation and greater flexibility than regular PLA.
  • Suitable for most FDM printers using 1.75mm filament.

Features

Product type FDM 3D printer filament
Brand eSUN
Model PLA-Matte
Material PLA
Color Red
Surface Matte

Technical information

Compatible printing technology FDM
Recommended print speed 40-100 mm/s
Recommended fan speed 100%
Density 1.329 g/cm³
Tensile strength 42 MPa
Bending strength 59.95 MPa
Bending modulus 2,878.5 MPa
Izod impact strength 6.2 kJ/m²
Elongation at break 50%
Thermal deformation temperature 51 °C
Melt flow index 5.8 g/10 min (190 °C / 2.16 kg)
Coil Recyclable cardboard

Safety warning

Usage Use only as a filament in a compatible FDM 3D printer. Follow the printer manufacturer's instructions for use. The nozzle and heated build plate may become hot during printing.

Height220mm
Length220mm
Weight1200g
Width220mm
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial