PoE hub Hikvision DS-3E1326P-EI / M
Product reference: 17-6931847199586

PoE hub Hikvision DS-3E1326P-EI/M

PoE hub Hikvision DS-3E1326P-EI / M

Product reference: 17-6931847199586

PoE hub Hikvision DS-3E1326P-EI/M

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
30250
Product in warehouse

Guarantee
12 month

Delivery from Lithuania in
2 - 4
business days

Your message has been successfully sent!
Fill in the required fields*

26-port 24-port PoE switch Model: DS-3E1326P-EI/M 24 × 10/100Mbps PoE ports, 1 × gigabit combo, 1 × gigabit RJ45 port IEEE 802.3at/af standards for PoE accessories (Max. 230 W PoE output). Supports 802.1Q VLANs Supports PoE watchdog to detect and restart unresponsive cameras Supports STP/RSTP loop prevention 6 KV discharge protection Up to 300 years of transmission. Supports cable detection for fault location Metal housing Description: Network settings • Ports: 24 x 10/100 Mbps PoE port, 1 x Gigabit combo, 1 x Gigabit RJ45 port • Standard: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z and IEEE 802.3ab • MAC address table: 16 K • Switching capacity: Whole-Device Performance: 14.8 Gbps; Port Performance: 8.8 Gbps • Packet forwarding speed: Whole-Device Performance: 11.01 Mpps; Port Performance: 6.55 Mpps • Internal cache memory: 4 Mbits PoE • PoE standard: IEEE 802.3af; IEEE 802.3at • PoE power connector: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) • PoE port: Ports 1 to 24 • Max. PoE ports power: 30 W • PoE available power: 230 W Software function • Long range mode: Ports 1 to 24: up to 300 m. Long range performance may vary depending on camera model or cable condition. • VIP port: Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient • Port isolation: Ports 1 to 24: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. • PoE Watchdog: Ports 1 to 24: auto detect and restart the cameras that do not respond. • Link Aggregation: Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation group(s). • Loop prevention: Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. • VLAN: VLAN is used for network scale planning and network health improvement. Supports 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLANs. • HPP: Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. • System maintenance: Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating. Home • Size: 440.00 mm x 44.00 mm x 220.80 mm (17.32\'\' x 1.73\'\' x 8.69\'\') • Frame: Metal material • Weight without packaging: 2.13 kg (4.7 lb) • Weight with packaging: 3.1 kg (6.8 lb) • Operating temperature: 0 °C to 45 °C (32 °F to 113 °F) • Storage temperature: -40 °C to 85 °C (-40°F to 185 °F) • Relative humidity: 5% to 95% (no condensation) • Power supply: 100-240 VAC, 50/60 Hz, Max. 4 A • Max. power consumption: 250 W • Power consumption in sleep mode: 20 W • Installation: Rack (equipped with mounting ears) • Discharge protection: 6 KV Approvals • EMC: CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020), IC (ICES-003: Issue 7:2020), RCM (AS/NZS CISPR 32: 2015) • Safety: CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017) • Chemical testing: CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial