eSUN PLA-Matte

eSUN PLA-Matte. Printing material: Polylactic acid (PLA), Printing colours: Yellow, Print speed: 200 mm/sec. Weight: 1 kg, Density: 1329 kg/m³, Diameter: 1.75 mm. Quantity per pack: 1 pc(s)

Matte PLA filament has no smell when printing, which is safe and environmentally friendly; And the spool is made by reusing injection molding of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper. Make 3D printing more sustainable with the environmental protection concept; The matte PLA surface is delicate and does not show layer lines; The filament is not easy to break which made the printing is smooth for a long time without clogging. PLA matte filament can be used for early concept models and rapid prototyping. Low density, PLA-Matte single-roll filaments are 21% more than other matte PLA product print models.

Features

Printing material: Polylactic acid (PLA)
Printing colours: Yellow
Print speed: 200 mm/sec
Impact strength: 4.7 kJ/m²
Tensile modulus: 25.976 MPa
Flexural modulus: 2249.05 MPa
Flexural strength: 42.6 MPa
Maximum extruder tip temperature: 230 °C
Elongation at break: 7.23%
Minimum extruder tip temperature: 190 °C
Build plate temperature: 45 - 60 °C

Weight & dimensions

Density: 1329 kg/m³
Weight: 1 kg
Diameter: 1.75 mm

Packaging data

Quantity per pack: 1 pc(s)