24-port switch Cudy GS1028EPS2 (24x 1G PoE, 2x 1G SFP)
Product reference: 26-SWITCHCUDYGS1028EPS2
  • Type: Switch
  • Brand: CUDY
  • Model: GS1028EPS2
  • Ports: 24 × PoE 1000 Mbps, 2 × SFP uplink 1000 Mbps
  • Communication protocol: IEEE 802.3af/at
  • PoE: up to 30W per port, total budget 300W
  • Bandwidth: 56Gbps
  • Packet forwarding rate: 41.664 Mpps
  • MAC address table: 8K
  • Operating modes: VLAN, Default, Extend
  • 17-24 ports Extend mode: up to 250 m, 10 Mbps
  • Rack mountable
  • Operating temperature: 0 °C to 40 °C
  • New
24 prievadų komutatorius Cudy GS1028EPS2 (24x 1G PoE, 2x 1G SFP)

24-port switch Cudy GS1028EPS2 (24x 1G PoE, 2x 1G SFP)

Product reference: 26-SWITCHCUDYGS1028EPS2
  • Type: Switch
  • Brand: CUDY
  • Model: GS1028EPS2
  • Ports: 24 × PoE 1000 Mbps, 2 × SFP uplink 1000 Mbps
  • Communication protocol: IEEE 802.3af/at
  • PoE: up to 30W per port, total budget 300W
  • Bandwidth: 56Gbps
  • Packet forwarding rate: 41.664 Mpps
  • MAC address table: 8K
  • Operating modes: VLAN, Default, Extend
  • 17-24 ports Extend mode: up to 250 m, 10 Mbps
  • Rack mountable
  • Operating temperature: 0 °C to 40 °C
You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
268,64 €
Product in warehouse

Guarantee
24 month

Delivery from Lithuania in
2 - 4
business days

Your message has been successfully sent!
Fill in the required fields*
  • General information
  • Model version GS1028EPS2 1.0
  • Flash/ROM 16 MB (128 Mbit) NOR
  • Gigabit RJ45/SFP Combo Ports 2
  • Gigabit RJ45 Ports 26
  • Gigabit RJ45 PoE ports #1~#24
  • Maximum power per PoE port 30W
  • PoE port notes PoE ports support 802.3at/af standards.
  • PoE Priority Configurable. If no priority is configured, smaller-numbered ports have higher priority.
  • Advanced Mode Ports Configurable
  • VLAN mode ports Configurable
  • LED Power, PoE Status of Each PoE Port, Link/ACT of Each Ethernet Port, PoE Max Status
  • Physical buttons Reset Button
  • Max Copper Speed and Distance Cat. 3 or higher cable: 100 meters at 10 Mbps, Cat. 5 or higher cable: 100 meters at 100 Mbps, Cat. 5e or higher cable: 100 meters at Gigabit, Cat. 5e or higher cable: 250 meters at 10 Mbps
  • Copper speed and distance notes 250-meter transmission is available when the port speed is set at 10 Mbps in the software.
  • Optical Spec and Distance Depends on the Installed Optical Module
  • MAC address table 8192
  • VLANs 4096
  • Maximum switching capacity 56 Gbps
  • Maximum transfer speed 41.664 Mpps
  • Large frames 15 KB
  • Packet buffer 4 Mbit
  • Power Input Type AC Inlet
  • Feeding methods AC
  • Power input 100-240V~ 50/60Hz
  • Power source 300W
  • Maximum power excluding PoE 20W
  • 802.3 Protocols 802.3x Flow Control, 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3z 1000BASE-X, 802.3az Power Saving, 802.3af PoE, 802.3at PoE
  • 802.1 Protocols 802.1p: LAN Layer 2 QoS/CoS, 802.1q: VLAN Bridge Operation, 802.1ab: LLDP/LLDP-MED
  • Port management Port On/Off, Port Negotiation Speed, Port Trunk (Static Aggregation), Port Mirror, Data Rate Limit, Jumbo Frame Settings, Storm Control, Traffic Monitor, MAC Address Management, EEE (802.3az)
  • PoE management PoE Priority, PoE Watchdog On/Off, PoE Watchdog Period/Packet Threshold, PoE Consumed Power, PoE Standard, Delayed PoE Delivery, Total PoE Power Limit, PoE Power Limit
  • Port Mirror Sessions 4
  • Port Trunk Groups 4
  • Max Port Num per Port Trunk Group 8
  • Level 2 (L2) features IGMP Snooping, Loop Prevention, DHCP Snooping, LLDP Config and Neighbors, MTU VLAN, Port-Based VLAN, 802.1Q VLAN, DSCP QoS, 802.1p QoS, Port-Based QoS
  • Fans 1
  • Fan Note Smart Cooling: The fan speed adjusts in real time based on power consumption.
  • Grounding Methods Three-Prong Plug
  • Electromagnetic compatibility IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV, IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 6kV
  • Environmental protection Operating Temperature: 0~40 (32~104 ), Storage Temperature: -40~70 (-40~158 ), Operating Humidity: 10~90% non-condensing, Storage Humidity: 10~95% non-condensing
  • Control Methods Config Web Page, SNMP V1/V2, Cudy App
  • Software update Local Upgrade
  • Reliability Backup and Restore
  • Diagnostic tools Cable Status/Length Diagnosis, Ping
  • Languages English, Bengali, German, Spanish, French, Portuguese, Russian, Arabic, Indonesian, Hindi, Urdu, Traditional Chinese, Simplified Chinese
  • Dimensions 440×220×44 mm (17.32×8.66×1.73 inches)
  • Product weight 2941.2 g (103.75 oz.)
  • Housing material Metal
  • Installation Desktop, Rackmount via Brackets
  • Package contents GS1028EPS2, Power Cord, Mounting Kit, Installation Guide

Manufacturer codeSWITCHCUDYGS1028EPS2
Weight3.082 kg
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial