M8AC Smart Battery Charger, AC 200W, DC 600W

High-quality AC/DC balance charger with microprocessor-controlled charging, discharging, signal measurement and power supply functions. Supports major battery types (LiPo, LiHV, LiFe, NiMH and Pb), operates on AC or DC voltage. Has a USB Type-C fast charging output and a 2.4-inch color IPS display.
Features:
M8AC is a multifunctional smart charger that combines the functions of a balance charger, discharger, signal meter and signal source in one compact device. It has a built-in AC 200W power supply, but supports both alternating current (AC) and direct current (DC) power supply.
The device charges, discharges and balances various types of batteries: LiPo, LiHV, LiFe, Li-ion, LTO, NiMH and Pb. The maximum charging power reaches 600 W, and the current - up to 20 A.
The M8AC also functions as a regulated power supply, allowing you to select a voltage from 1 to 35 V and a current from 0.5 to 20 A.
The device has a USB Type-C fast charging output (up to 65 W), so it can charge phones, tablets, laptops, or other devices.
Integrated diagnostic functions allow you to measure battery voltage, internal resistance, automatically balance lithium cells, and check PWM, PPM, and SBUS signals.
The charger has a color IPS display, a multilingual user interface, and can be upgraded via a USB connection.
The charger has protection against overvoltage, overcurrent, short circuit, overheating, too low input voltage, too long charging (time out), deep discharge, and is also flame resistant V0.
It is a reliable, powerful and versatile device designed for RC model users and tech enthusiasts seeking precise battery management and analysis.
Designed for charging and balancing batteries of RC models (drones, airplanes, cars, boats), diagnosing lithium packs, testing signals, laboratory power supply in constant current and voltage mode, and fast charging of various devices via USB Type-C connector.
Technical data:
Input: 100-240 V AC, max. 2.5 A / 7-35 V DC, max. 25 A.
Charging current: 0.1-20.0 A.
Maximum charging power: 200W in AC mode, 600W in DC mode.
Maximum discharge power: 20W (0.1-3.0A) / 600 W (0.1-20.0A) in Recycle mode.
Balancing current: 1000 mA @ 4.2 V.
Supported batteries: LiPo / LiHV / LiFe / Li-ion / LTO 1-8 S; NiMH / NiCd 1-20 S; Pb (lead acid) 1-12 S.
Internal resistance measurement: 0.1-99 mOhm @ 1-8S.
Adjustable voltage (in CC+CV power supply mode): 1.0-35.0 V.
Adjustable current: 1.0-20.0 A.
Measurement functions: PWM/PPM/SBUS signals; voltage; internal battery resistance; ESC testing.
Connectors: DC input, AC input, Signal connector (PWM / PPM / SBUS); Balance connector 2-8S, XT60 output, USB Type-C output.
USB Type-C output: max. 20.0 V @ 65 W.
Display: 2.4 inch IPS LCD (320 x 240).
Operating temperature: 0-40°C.
Dimensions: 108 x 113 x 62 mm.
Weight: 490 g.
The set includes: M8AC charger, AC power cable 120cm, USB Type-A to USB Type-C cable 30cm, user manual and screen protector.
Warranty: 24 months