Video interface, Volvo 2014 reversing camera - sensus connect monitor 7 inches. rl2-sc14

Video interface, reversing camera Volvo 2014Connecting a reversing camera and other video sources in the car sometimes requires the use of additional accessories, because the car is not factory-adapted to such solutions. If you own one of the Volvo cars whose models are shown below, we encourage you to purchase a video interface, Volvo 2014 reversing camera -> Sensus Connect monitor 7 inches. RL2-SC14.Connect 2 video sources and a rear camera in your vehicleVideo interface, reversing camera Volvo 2014 -> Sensus Connect 7-inch monitor. RL2-SC14 will be used to connect two image sources and 1 rear camera in the car. The camera will turn on automatically when you engage reverse gear. In some car models, it is possible to activate the guide lines of the reversing camera. Video inputs are compatible with PAL and NTSC. r.LiNK video interface for the Volvo 2014 model -> Sensus Connect and internet button, 7-inch monitor. For connecting 2 different video sources and 1 rear camera. Product features: 2 CVBS video inputs for different video sources (e.g. DVD player, DVB-T tuner, ...) Input for the rear reversing camera, Automatic activation of the rear camera when the vehicle is turned on reverse gear,Ability to activate reversing camera guide lines (not available on all vehicles)Image activation while driving (ONLY for connected video sources)Video inputs are only compatible with PAL, NTSC Make model: Volvo  2014 -> Sensus Connect 7 cai. (with Internet button) Limitations:Video only - The interface ONLY inputs video signals into the infotainment system. The existing factory audio-AUX input or FM modulator can be used to provide audio signals. Distance/PDC Lines - If the CAN-Box does not receive the required information from CAN-bus, Parking and PDC lines will not be supported, Factory Rear View Camera - Automatic Video Switching to the factory rear camera is only possible when reverse gear is engaged. If you want to delay the signal, an additional electronic circuit is required. Connection: video: standard blue GVIF cable power supply and CAN bus: Plug & play video input (2x): RCA connector rear camera input: RC connector Technical data operating voltage 7V ~ 25V quiescent current 3.0mA current consumption 190mA 0.7V video input ~ 1V video input PAL / NTSC formats, temperature range - 40 ° C to + 85 ° C, video box dimensions 113 x 22 x 104 mm (width x height x T), CAN box dimensions 73 x 22 x 30 mm (width x height x D)