Infoadapter + steering wheel control Fiat Ducato 11/ 2021-2023 12pin/ 32pin Fiat

The Infodapter retains several vehicle display functions after replacing the OEM radio or navigation system. Vehicle-specific settings are available and will be displayed on the aftermarket head unit. The SWC buttons are necessary to access the Infodapter's setup menu. Also check out our listed OEM head units and compare the wiring harness connectors shown in the photo with the connectors in your car and make sure that they match optically and technically. Please note that in some cases not all functions are supported. For example, Trailer Assist, E Call or other driver assistance and comfort systems. Check the vehicle menu for various settings before installation.Check operation of settings and vehicle system before final installation.Make and model:Fiat Ducato (ZAF 250) 11/2021 - 2023Note:vehicles with steering wheel controls Connector: 12 Pin Green / 32 Pin Blue FiataTo enter the settings, connect the reverse signal output (purple/white) to the HU.To visualize the settings, connect and configure the reversing camera input on the HU.Vehicles with 7" OEM HUvehicles with 10" OEM satellite navigation screen following settings supported:Language / Distance units / Clock / Temperature units / Consumption units / Speed ​​units / Follow me / Automatic door opening on exit / Flying lights with lock / Auxiliary lights / Automatic door locks / Daytime running lights / Cornering lights / Ambient lighting / Welcome lights / Parking sensor / Level volume / High beam control / Parking sensor / Rain sensor / Lane warning / Lane detection / Tire pressure units / Traffic sign recognition / Traffic sign warning / Vehicle shutdown options / Blind spot assist / Headlight sensor sensitivity / Forward collision warning / Frontal collision sensitivity