ICOM IC-R6
Product reference: 612

ICOM IC-R6

Product reference: 612
You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
27000
Product in warehouse

Guarantee
24 month

Delivery in 
2 - 3
business days

Your message has been successfully sent!
Fill in the required fields*

( Item on order, delivery in 9 days )

100 channels per second broadband signal "search engine"

100 kHz-1309.995MHz band scan

Although The IC-R6 scanner can scan a very wide frequency range, but its receiver provides excellent sensitivity and other receiver characteristics. You will be able to scan radio amateur frequencies, commercial frequencies, AM, FM, shortwave frequencies, TV, and broadcast frequencies of other devices.

100 channels per second high-speed scanning

IC-R6 scans 100 channels per second at high speed . This is the highest scanning speed with the highest search efficiency over the entire 1300 MHz spectrum.

15 hours of continuous operation

IC-R6 is energy efficient, designed to scan for many hours on a single charge. With rechargeable Ni-MH batteries (1400mAh × 2), the IC-R6 can work up to 15 hours continuously.

1300 memory channels with 22 memory banks

1300 alphanumeric memory channels, 50 scan lines and 200 auto channel recording, The IC-R6 gives you flexible work when scanning frequencies. Use the "Bank link" function to select or connect any of the 22 memory banks.

VSC (Voice Squelch Control)

VSC opens only when a modulated signal is present and ignores noise. This is a handy feature for those listeners looking for talk, news and music rather than data traffic or beacons.

Multiple power options

IC-R6 can be powered by rechargeable Ni-MH batteries or alkaline batteries. Also, IC-R6 can be powered by an external CP-18A/E power source.

Other functions

Built-in audio low pass filter
±1.0ppm high frequency stability (at 25°C)
Earphone cord antenna for AM aviation as well as FM broadcast
Ferrite bar antenna for AM broadcast
150mW loud audio with internal speaker
DTCS and CTCSS tone squelch and reverse tone squelch
Priority watch function with priority beep function
Optional CT-17, CI-V level converter for remote control
PC programmable with optional CS-R6
Receiver-to-receiver cloning (optional OPC-474 required)
Auto power OFF (0.5–2 hours and end of busy signal)
Compact, drip-resistant construction
Duplex operation monitoring
Automatic LCD backlight
Dial speed acceleration
Built-in RF attenuator
Auto memory write scan stores the detected frequency, mode and tone into a specified memory
Reversible up/down buttons and dial knob for volume, frequency, memory channel, scan direction and set mode settings
Optional new tube earphone, SP-27
Weather channel receive with weather alert

Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial