Jeweler communication technologyProprietary wireless communication technology to transmit commands, alarms, and events., Key features:, Two-way communication., Advanced sabotage protection., Block encryption featuring a dynamic key., Instant notifications., Remote configuration in the Ajax apps., Learn more
Frequency bands866.0-866.5 MHz 868.0-868.6 MHz 868.7-869.2 MHz 905.0-926.5 MHz * 915.85-926.5 MHz 921.0-922.0 MHz, * Certified according to UL/ULC standards., Depends on the sales region.
Maximum effective radiated power (ERP)up to 20 mW, Automatic power control to reduce power consumption and noise interference.
Radio signal modulationGFSK
Radio signal operating rangeup to 3,900 ft, Between detector and control panel (or range extender) in an open space., Calculate the radio signal range at the facility
Encrypted connectionAll the data stored and transmitted are protected by block encryption with a dynamic key.
Frequency jumpsRadio communication uses frequency hopping to prevent interception and jamming., Learn more
Detection
Sensitive element1 reed switch
Magnetssmall and big one come in the set, The small magnet operates at a distance of up to 0.4″ from the detector, and the big magnet — up to 0.8″.
Reed switch flicker protectionThe detector ignores vibrations lasting up to 0.15 s.
Input for connecting an additional detectorWired detector with the normally closed (NC) contact type., How to connect a third-party wired detector
Sound signalWhen the system is disarmed, the siren makes a special sound to notify that the opening detectors are triggered., Learn more
Protection against sabotage
Tamper signalNotifications on attempts to detach the detector from the surface or remove it from the mounting panel., Learn more
Protection against counterfeitingdevice authentication
Loss of connection detectionafter 36 s, Depends on the Jeweler or Jeweler/Fibra settings., Learn more
Power supply
Battery1 × CR123A, Pre-installed.
Typetype C
Estimated battery lifeup to 7 years
Nominal operating voltage of the device3 V⎓
Quiescent current consumption of the device at nominal voltage17.5 μA
Maximum device current consumption at nominal voltage21.4 mA
Full battery capacity1,600mAh
Low battery voltage2.5 V⎓
Low battery recovery voltage2.7 V⎓
Final battery voltage2.1 V⎓, Device is switched off.
Final battery capacity300mAh
ManufacturerFor Huider, UL listed.
Housing
Detector dimensions3.54″ × 0.79″ × 0.79″
Dimensions of the large magnet3.54″ × 0.79″ × 0.79″
Small magnet dimensions2.16″ × 0.43″ × 0.24″
Detector weight1.02 oz
Operating temperature limitfrom 14 °F to 104 °F, Temperature range from 32 °F (0 °C) to 120 °F (+49 °C) is certified according to UL/ULC standards.
Humidityup to 75%, Humidity of up to 85% is certified according to UL/ULC standards.
Protection classIP50
Weight
0.029 kg
Offensive and promotional comments are unpublished.