Toyota Touch 2/ Entune reversing camera interface adapter

The Toyota front camera mounting adapter is a revolutionary solution that combines 3 devices: front camera adapter (allows you to connect a front camera in the car), rear camera adapter (also allows you to connect a rear view camera if it has not been installed by the manufacturer ) and front camera switch (allows you to use OEM steering wheel buttons as dash camera control buttons). The system offers quick and easy Plug&Play connection without the need to cut car cables. All OEM features work as before installation and there is no risk of voiding your car warranty. The solution is suitable for cars in the European, American, Canadian, Australian and New Zealand markets. The RFCC system provides 2 camera control modes: Automatic mode: the image from the front camera will be displayed on the screen automatically for 30 seconds after shifting from reverse gear to first gear (or driving) or until the car reaches a speed above 20 km/h. Manual mode: the image from the front and rear cameras can be switched at any time using the "MODE", "SEEK+", "SEEK-" buttons on the steering wheel. The operating algorithms are described in detail in the user manual. System: Touch 2Toyota Touch 2Toyota Touch 2 with GoToyota Touch 2 with Go PlusAdditional compatibility terms: Monitors manufactured by Panasonic/Pioneer are supported.How to easily determine the monitor manufacturer.Make and model: Toyota Alphard 2015 - 2017Toyota Auris 2014 ->Toyota Corolla 2013 - 2019Toyota Corolla Sedan 2013 - 2019Toyota GT86 2016 ->Toyota Highlander 2013 ->Toyota Hilux 2013 ->Toyota Land Cruiser 150 2013 ->Toyota Mirai 2016 - 2019Toyota Prius+ 2016 - 2019Toyota Rav 4 2014 - 2019 System: Entune 2.0Entune 2.0 AudioEntune 2.0 Audio PlusEntune 2.0 Premium AudioAdditional Compatibility Terms: Monitors manufactured by Panasonic/Pioneer are supported. How to Easily Determine Your Monitor Manufacturer . Make and model: Toyota 4Runner 2014 - 2020Toyota Alphard 2015 ->Toyota Avalon 2014 - 2020Toyota Corolla 2013 - 2019Toyota Fortuner 2015 ->Toyota GT86 2016 ->Toyota Highlander 2013 - 2020Toyota Mirai 2016 - 20 19Toyota Prius c 2014 ->Toyota Prius v 2014 - >Toyota Rav 4 2014 - 2019Toyota Sequoia 2014 - 2020Toyota Sienna 2014 - 2020Toyota Tacaoma 2014 - 2019Toyota Tundra 2014 - 2020 Note : Monitors manufactured by FujitsuTen are not supported. The system is not compatible with Toyota Venza. FeaturesQuick and easy Plug&Play connection without damaging your car wiringFront camera to OEM monitor connection (front view camera adapter)Rear view camera connection to OEM monitor (rear view camera adapter)Automatic and manual camera control modesUse the OEM steering wheel buttons to switch between front camera , rear camera and factory screen;All factory functions work in the same way as before installationCar warranty is maintained Note:  Only NTSC cameras are supported.Note:  An additionally installed rearview camera (unless the manufacturer had an OEM rearview camera) should be powered from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera you are connecting, namely the voltage required for the camera, you can use the +6V input voltage that the monitor produces. (see connection diagram). In case the camera requires more than +6V, connect the camera power to the ACC line. Note:  To ensure that the operation algorithms work properly, the front camera should only be powered from the RFCC.