Adapter for connecting a rear view camera toyota / lexus mfd gen5 multi-displays

Toyota/Lexus reversing camera connection adapterAre you worried when reversing or reversing your car that you will hit another vehicle or a post and damage your car? In such a case, a good solution will certainly be to use a rear camera, which allows you to see the view from the rear of the car on the monitor located in the cockpit. However, you must have the appropriate accessories that will allow you to connect the camera to the screen.How does the rear camera connection adapter work?The adapter for connecting the reversing camera offered by us is designed for Toyota and Lexus cars with MFD GEN5 multimedia displays. The adapter is installed very quickly and does not require interfering with or damaging the original cables. The image from the reversing camera starts on the screen automatically when driving backwards.Reversing camera connection adapter - ToyotaRear camera toxa0a function that is used by an increasing number of car owners. It allows the driver to monitor the situation at the rear of the vehicle on the screen, when reversing or reversing the car. This gives it a better view of cars behind it and the location of blind spots such as trees or posts. To connect the rear view camera to the monitor, however, you need a special adapter, which you can buy at the car-tronic.pl store.Adapter for rear view camera for ToyotaThe adapter can be easily installed using the Plug Play function, which does not require interfering with the original vehicle wiring.xa0Cable for connecting the rear view camera to Toyota / Lexus MFD GEN5 multifunction displays without damaging the car wires.xa0The image from the rear view camera will be automatically displayed on the screen when reversing.xa0The device is connected to a 28-pin socket (as shown inxa0the wiring diagramxa0).xa0After connection, all factory functions that operate using this socket are retained due to the type.Note!xa0Additionally, the installed rear view camera should be powered from the ACC line (first turn of the key), otherwise the camera input will not be active.xa0Depending on the type of camera being connected, namely the voltage required for the camera, you can use the +6 V input voltage, which generates monitor.xa0If the camera requires more than 6V, connect the camera's power supply to the ACC line.Compatibility : Lexusxa0ES350 2007 - 2009 Lexusxa0GS350 2007 - 2009 Lexusxa0GS430 2007 -> Lexusxa0GS450hxa0 2007 - 2009 Lexusxa0GS460 2008 - 2009 Lexusxa0IS250 2006 - 2009 Lexusxa0IS350 2006 - 2009 Lexusxa0IS F 2008 - 2009 Lexusxa0LS460 2007 - 2009 Lexusxa0LS460L 2007 - 2009 Lexusxa0LS600hL 2008 - 2009 Lexusxa0LX470 2007 -> Lexus LX570 2008 - 2009 xa0 System: MFD GEN5 multi-function displayxa0 -Cars with OEM navigation -Cars without OEM navigation -Cars without OEM parking assist functionxa0 Toyotaxa0Land Cruiser 200 2007 - 2009 xa0 System: MFD GEN5 multi-function displayxa0 -Cars with OEM navigation -Cars without OEM navigation -Cars without OEM parking assist functionNote!xa0Only NTSC format cameras are supported.xa0The picture is for reference only.xa0The appearance of the control panel and monitor may differ slightly depending on the car model.