Adapter for steering wheel control for Nissan Juke 2010 - 2019. 360° cameras. ctsns028.2

Steering Wheel Remote Control Supported Date/Time SettingsSupported OEM 360° Camera System General Installation Instructions:Testing:1: Check all operating functions and vehicle setting functions of the OEM device2: Disassemble the OEM device without voltage3: Check all interface connections for correctness and continuity without voltageConnection and connection sequence:1: Make settings and hardware configuration of the voltage-free interface2: Check the configuration of the radio connection cable3: Connect the radio connection cable according to the operating instructions of the retrofit device4: Make all other connections according to the operating instructions of the retrofit device5: Connect the entire installation to the vehicle with the connection under voltage lastFig. 6: Configuration of the interface software in accordance with the information contained in the text of the article and in the BDA7: Configuration of the retrofitting device in accordance with the operating instructions of the retrofitting device steering wheel remote control/camera/FSE/antenna phantom power and others8: Functional test of the steering wheel remote control and vehicleChanges in the interface hardware configuration and cable to connect the radio:1: Make changes without voltage2: Connection after modification, see 5 to 8 aboveIf the interface or vehicle is malfunctioning:1: Upgrade to OEM device2: Operate OEM device3: Establish CAN bus silence4: Check interface hardware configuration5: Connect after resting the CAN bus, see 5 to 8 aboveConnections, connection changes, alternative connections, loose cable connections or extensions of loose cable connections given in the information text or