Adapter for hood kamery alfa romeo tonale, fiat ducato, Tipo, 500, 500e, jeep compass.

The interface equips the car with a reversing camera and displays the image on the original car radio (which must be prepared for this). Some adapters are plug and play solutions, others require splicing cables or other modifications. Please read the assembly instructions in advance or contact us if you have any questions. In addition to the adapter, you need a reversing camera. A video interface for the reversing camera, front camera and two other video sources. FBAS and AHD support. Fits Alfa Romeo Tonale, Fiat 500 and 500e, Ducato3 (8 Series) and Tipo and Jeep Compass with Uconnect and 10 or 10.25 inch tablet. Product Features Video converter for digital reversing camera input 1 video input for AHD 720p PAL reversing camera (cinch)Automatic conversion of the AHD camera signal to the reversing camera input when reverse gear is engaged. All video inputs are compatible with CVBS and AHD. Make and model: Alfa Romeo Tonale (965) 05/2022 ->Navigation: Connect 10.25 inch or Connect NAV 10 .25 inch - (R1 INT ER) with ultra-wide-angle tablet monitor with separate head unit Fiat Ducato 3 (8 Series) 2021 ->Fiat Tipo (356) 2023 ->Navigation : Uconnect 5 R1 EXT ER with 10-inch tablet monitor and separate head unit head unit Fiat 500 11/2020 ->Fiat 500e 11/2020 ->Navigation: Uconnect 5 R1 EXT ER with 10.25-inch ultra-wide-angle tablet monitor with separate head unit Jeep Compass 2021 ->Navigation: Uconnect5 R1 EXT ER mit 10.1 Zoll Tablet Monitor mit separater Head -Unit Note: Not compatible with Jeep Compass from model year 2021 with Uconnect5 with 8.4 inch tablet monitor and all-in-one head unit. LimitationsCAN Bus Compatibility  -  CAN Bus interface compatibility may be limited in its entirety to some vehicles or for specific functions. This may be noticeable both during installation and later. The interface with all video inputs can be operated using analog switching signals without the need to connect to the vehicle's CAN bus. Individual additional features have been omitted, see below.Video only - The interface does not transmit any audio signals. To supply audio signals, use the existing factory AUX audio input or optional products. (e.g. FM modulator)Factory rear view camera - Automatic switching to RFK input only occurs as long as reverse gear is engaged. Optional accessories are required for different switching times.Aftermarket Front Camera - Switch to front camera automatically when reverse gear is disengaged for 5, 10, 15 or 20 seconds (depending on OSD menu setting). Manual switching to the front camera is also possible using an external button. Routing lines - If the vehicle's CAN bus is not fully compatible with the interface, the routing function cannot be used. Connections Image input: 4-pin HSD Power supply and CAN bus: Plug & Play (depending on vehicle)Video inputs (2x): Cinch socketsRear camera input: RCA socketFront camera input: RCA socketTrigger cables (4x): Open cable endsTechnical specificationsOperating voltage 12V DC (9~16V)Current consumption 7mAConsumption 24mA Signal type input CVBS/AHDSignal standard CVBS/AHD NTSC/PALToperating temperature -40°C to +85°CInterface box dimensions 117 x 30 x 108 mm (W x H x D)Legal noticeVideo while driving must not distract the driver or directly, nor indirectly. In most countries/states this is prohibited by law. In addition to operation while stationary, this product is only intended to display standing menus (e.g. MP3 menus from DVD players) or images from the reversing camera while driving.